washer wrench for sale, brand-new and used.

20 New 3/8"-24 fine thread thick flange hex head nuts from top Nascar team. These are hardened grade 8 nuts. The flange washer is .135 thick and .875 diameter, nut is .500 overall length, uses a 11/16" wrench.

20 New 5/16"-18 coarse thread, thick flange, hex head nuts and 4" long studs from top Nascar team. Studs have 1.600" threads on one end and .700" threads on the other end. These are hardened grade 8 nuts and studs.

20 New 3/8"-16 coarse thread, thick flange, hex head nuts and 2" long studs from top Nascar team. These are hardened grade 8 nuts and studs. The flange washer is .135 thick and .875 diameter, nut is .500 overall length, uses a 11/16" wrench.

20 New 5/16"-24 fine thread thick flange hex head nuts from top Nascar team. These are hardened grade 8 nuts. The flange washer is .135 thick and .750 diameter, nut is .375 overall length, uses a 5/8" wrench.

Unimat Clamps set of 2 ITEM DESCRIPTION 2 Clamps 1 3/4"(45 mm) x 0.830"(21 mm) x 1/4"(6 mm)2 T-Nuts1 allen wrench 5 mm2 bolt with nut and washer (6 mm long 50 mm)4 bolt (6 mm long 28 mm)

May be used as a spindle-adapter for a wood lathe from LatheCity Included: Morse Taper #2 (MT2) to 1"-8 TPI (x1.5" thread length), steel, 1/4-20 drawbar, RH threads + nut and washer

May be used as a spindle-adapter for a wood lathe from LatheCity

May be used as a spindle-adapter for a wood lathe from LatheCity Morse Taper #3 two in one

Delta shaper 1" spindle made from an import generic part and machined to fit the Delta USA made Heavy Duty shapers 1" spindle has the rigidity required for panel raising and other wide diameter or tall cutters. -Includes draw bar, draw bar nut, 1" spindle machined to fit Delta Heavy Duty USA shapers. -Compatible with all Delta Heavy Duty heavy duty shapers manufactured prior to 2005.

For Sale - A fully reconditioned vintage DELTA UNISAW JR. - $1,050.00 Up for sale is this very rare, complete, and all original 1950 Delta 8” Unisaw Junior. This scaled down, small

New billet aluminum replacement rear clamp block for your Delta Unisaw fence This is a replacement clamp block for the rear of the early style Unisaw fence. The early style fence is shown in photo #2. This fence is identified by the presence of the small rear clamp tighening knob above the lever lock at the operator side

FOR SALE IS THIS LOT OF WOOD SHAPER TOOLS THAT CONSIST OF THE FOLLOWING: 1- LARGE SPANNER WRENCH CAT 1520- 1 1/16" OR 3/4" FOR 1/2" OR 3/4" BORE. 2 - SMALL SPANNER WRENCHES SBS 47- 5/8" OR 1/2" 1- LARGE WASHER - 1 1/2" 4- 1/2" SPACERS....SOME SIGNS OF WEAR BUT SOLID AND VERY USEABLE.

TDP-5 Automatic Single Punch Tablet Press Small Particle Forming Machine function review(){ img=document.getElementById('imgsource'); wid=img.width; hei=img.height; if(wid400){