waste oil pump for sale, brand-new and used.

FOR MORE INFORMATION ABOUT OUR PUMPS, GO TO REDLINEPUMPS DOT COM OR CALL 1-605-881-3473. This is our Heavy Duty MP3000RSG 110 Volt Transfer System which features a high quality Baldor Industrial Grade Reduced Speed 1/3 HP 110 volt motor. This system comes with a full 1 year warranty!

FOR MORE INFORMATION ABOUT OUR PUMPS, SEARCH REDLINEPUMPS ON THE WEB OR CALL 1-605-881-3473. Bid with confidence. We have a money back return policy if your not satisfied.

FOR MORE INFORMATION ABOUT OUR PUMPS, GO TO REDLINEPUMPS DOT COM OR CALL 1-605-881-3473. This is our Heavy Duty MP3000F Complete Waste Oil Filtration System. This high quality system is a 110 Volt unit which features a high quality Baldor Industrial Grade Reduced Speed 1/3 HP 110 volt motor.

FOR MORE INFORMATION ABOUT OUR PUMPS, GO TO REDLINEPUMPS DOT COM OR CALL 1-605-881-3473. This is our Heavy Duty MP3000F Complete Waste Oil Filtration System. This high quality system is a 110 Volt unit which features a high quality Baldor Industrial Grade Reduced Speed 1/3 HP 110 volt motor.

FOR MORE INFORMATION ABOUT OUR PUMPS, SEARCH REDLINEPUMPS ON THE WEB OR CALL 1-605-881-3473. Bid with confidence. We have a money back return policy if your not satisfied.

FOR MORE INFORMATION ABOUT OUR PUMPS, SEARCH REDLINEPUMPS ON THE WEB OR CALL 1-605-881-3473. Bid with confidence. We have a money back return policy if your not satisfied.

Welcome to Adobe GoLive 6 "A VACUUM PUMP THAT IS FAST AND THOROUGH SAVES YOU NOT ONLY TIME, BUT ALSO EXPENSE OF CALL BACKS AND DISSATISFIED COSTUMERS"

*NEW* NOS IN ORIGINAL BOX You Get Four Boxes HARVEY'S BIO 520 CUTTING OIL FRESHENER for use on Vertical Milling Machines. Was featured on the cover of NEW EQUIPMENT DIGEST in 1992 as a New Breakthrough Active Enzyme Cleaning System. Still very useable on many of the milling machines still in use today.

*NEW* NOS IN ORIGINAL BOX You Get Five Boxes HARVEY'S BIO 520 CUTTING OIL FRESHENER for use on Vertical Milling Machines. Was featured on the cover of NEW EQUIPMENT DIGEST in 1992 as a New Breakthrough Active Enzyme Cleaning System. Still very useable on many of the milling machines still in use today.

33000W VA PURE SINE WAVE GENERATOR /3000W LF PSW POWER INVER

FOR MORE INFORMATION ABOUT OUR PUMPS, SEARCH REDLINEPUMPS ON THE WEB OR CALL 1-605-881-3473. Bid with confidence. We have a money back return policy if your not satisfied.

Product Description Submersible Sewage Pump, Power Rating 1/2 HP, Voltage @ 60 Hz 115 Volts, Phase Single, Speed 3450 RPM, Current Rating 15.0 Amps, Discharge NPT 2 Inches, Cord Length 20 Feet, Impeller Cast Bronze, Off Point 5 Inches, On Point 14 3/4 Inches, Shut Off 42 Feet, Water Flow @ 10 Feet of Head 124 GPM, Water Flow @ 15 Feet

New in box . Little Giant 6E-CIM, 1/3 HP, 50 GPM - Manual Submersible Sump Effluent Pump, 25' power cord (506711)Submersible Sump / Effluent PumpThe 6E-CIM "Eliminator" submersible pump from Little Giant is specifically engineered to handle the tough demanding tasks of wastewater and effluent transfer with high efficiency and long term dependability. For residential and light commercial use, the pump has a cast iron, oil-filled motor housing for lifetime lubrication and rapid heat dissipation.

This is the Redline MP3000EX 1HP Waste Oil Transfer Pump which features a Leeson 1 HP electric motor and a 3/4" port rotary gear head. This pump is self priming and delivers up to 15 GPM. This unit is built by Redline Custom Equipment, Inc.

Removed from a good running Clean Burn Waste oil heater. Was replaced due to the rear seal seeping oil (seal should be replaced bwfore using it, but the pump works as is.) Sold as is. Also, the shaft has a burr in it, but does not affect operation.

Move Motor Oil With Confidence Tired of whimpy oil pumps? We've gone through 4 years of development on these pumps. Upgrades have included a custom US Made Baldor motor, viton seals to the pumpheads, scrapping troublesome pressure regulators.

SUNTEC J4NB-A1000G REPLACES J3NBN-A132B, J3NBNA132B, J3NBN A132B BOOST PUMP, PUMP ONLY, 1725 RPM, GPH 18, 20-40 PSI REPLACES J3NBN-A132B, J3NBNA132B J4NBA1000G SUNTEC J4NBA1000G

Welcome to ProFlow Dynamics, LLC. We supply leading brands of fluid handling components and offer several fluid handling and measurement solutions to our customers. The following item is up for sale.

BARNES, SE411, 096747, 0.4 HP, 115 V, 1 PH, 1750 RPM, 15 FT CORD, NO AUTO, SUBMERSIBLE EFFLUENT PUMP Barnes SE411 SE Series Cast Iron Residential Sump Pump 4/10HP 1750 RPM. Heavy duty sewage pump, and has a rugged cast iron body and impeller. It features a mechanical switch that is molded inside a waterproof float that turns your pump on and off automatically and a cast iron housing, a cast iron, two vane impeller, and a 416 stainless steel shaft.