+ Post new Ad
WILTON VISE, BASE ASSEMBLY, FITS 1941-1947 PAT. PENDING, WILTON TOOL CO. NO4., US $100 – Picture 0
WILTON VISE, BASE ASSEMBLY, FITS 1941-1947 PAT. PENDING, WILTON TOOL CO. NO4., US $100 – Picture 0

Wilton Vise, Base Assembly, Fits 1941-1947 Pat. Pending, Wilton Tool Co. No4.

US $100

  • Arlington Heights, Illinois, United States
  • May 26th
Open on mobile:
QR code
              Fellas, if you are one of the many that have a old Chicago 1st generation that's a 4" No.4, or says PAT. PENDING, or WILTON TOOL CO. and has no date below or 46, 47 stamped below or even a little later, this new modern base assembly will fit. It comes with 2 stainless steel acorn nuts and the only modification you may have to make is to shorten the height of the bolt or use a washer if the acorn nut doesn't go all the way tight. This base assembly is about 3/4" higher and unlike the original, actually has tongue and groove teeth that locks it down also enabling it to swivel 360 and lock in any position. If you need a base and aren't sure, please drop me a note. Shipping will be Flat Rate to the 52 states only. Again, any questions, please ask. Thanks for looking.   Note, this is for the 4" early bullets only. If you have a bigger antique Bullet, contact me.

Directions

Similar products from Grips & Tongs

Kurt Movable Jaw ML35 Modular Vise / CNC milling machine shop

Kurt Movable Jaw ML35 Modular Vise / CNC milling machine shop

  • Newberg, Oregon, United States
  • May 27th
6in Kurt Double Lock Vise Tower Pallet

6in Kurt Double Lock Vise Tower Pallet

  • Garden City, Idaho, United States
  • May 27th
8 INCH MACHINE VISE

8 INCH MACHINE VISE

  • North Tonawanda, New York, United States
  • May 27th
BOWES TCVL-1 MANUAL HOLD DOWN TOGGLE CLAMP (QTY.3) #60982

BOWES TCVL-1 MANUAL HOLD DOWN TOGGLE CLAMP (QTY.3) #60982

  • Resaca, Georgia, United States
  • May 27th
TILTING AND SWIVELING ANGLE MACHINIST VISE DRILL PRESS MILLING 3-1/2 JAWS NICE

TILTING AND SWIVELING ANGLE MACHINIST VISE DRILL PRESS MILLING 3-1/2 JAWS NICE

  • Jupiter, Florida, United States
  • May 27th
USA MACHINISTS 2-1/2" ADJUSTABLE ANGLE DRILL PRESS VISE

USA MACHINISTS 2-1/2" ADJUSTABLE ANGLE DRILL PRESS VISE

  • Ellington, New York, United States
  • May 27th
1" X 3" LOC X 5.5" OVERALL CARBIDE COATED FINISH END MILL GREAT FOR ALUMINUM

1" X 3" LOC X 5.5" OVERALL CARBIDE COATED FINISH END MILL GREAT FOR ALUMINUM

  • Ventura, California, United States
  • May 27th
Wilton Hydraulic No. 303 Pow-R-Arm

Wilton Hydraulic No. 303 Pow-R-Arm

  • Yuma, Arizona, United States
  • May 27th
KURT D60 MILLING MACHINE VISE

KURT D60 MILLING MACHINE VISE

  • Boynton Beach, Florida, United States
  • May 26th
KURT 3600V CNC MACHINE VISE

KURT 3600V CNC MACHINE VISE

  • Boynton Beach, Florida, United States
  • May 26th
Vintage Wilton Scout Bench Vise 3 1/2" Jaws Pipe Jaws

Vintage Wilton Scout Bench Vise 3 1/2" Jaws Pipe Jaws

  • Jane Lew, West Virginia, United States
  • May 26th
milling machine mill parts/ pieces LOTTT!!! tools, holders, bars, cutters

milling machine mill parts/ pieces LOTTT!!! tools, holders, bars, cutters

  • Houston, Texas, United States
  • May 26th
Machinist Vise 2 1/2" Vise Machinist Tool, Machinist Tools

Machinist Vise 2 1/2" Vise Machinist Tool, Machinist Tools

  • Valparaiso, Indiana, United States
  • May 26th
VINTAGE CRAFTSMAN Swivel Vise w Anvil & Pipe Jaws 506-51801 MADE IN USA

VINTAGE CRAFTSMAN Swivel Vise w Anvil & Pipe Jaws 506-51801 MADE IN USA

  • Hendersonville, Tennessee, United States
  • May 26th
Pana-Vise 301

Pana-Vise 301

  • Rockport, Texas, United States
  • May 26th
Vtg*SEARS Craftsman Bench Vise*Swivel Base 391-5180*ORIG*FAST SHIPPING

Vtg*SEARS Craftsman Bench Vise*Swivel Base 391-5180*ORIG*FAST SHIPPING

  • Woodland Hills, California, United States
  • May 26th
Vintage PALMGREN Tilting Machinist Milling Vise 2 1/2"

Vintage PALMGREN Tilting Machinist Milling Vise 2 1/2"

  • Saint Louis, Missouri, United States
  • May 26th
Reed 204 Vise, 4 Inch Jaws, Swivel Base, Smooth Jaws

Reed 204 Vise, 4 Inch Jaws, Swivel Base, Smooth Jaws

  • Prior Lake, Minnesota, United States
  • May 26th
NOS AMERICAN SUN 2-3/4" Micro Precision Milling Machine Vise M10D2 Aciera Deckel

NOS AMERICAN SUN 2-3/4" Micro Precision Milling Machine Vise M10D2 Aciera Deckel

  • Perth, Ontario, Canada
  • May 26th
HHIP 3900-0017 3-1/2 Inch Angle Drill Press Vise

HHIP 3900-0017 3-1/2 Inch Angle Drill Press Vise

  • USA, United States
  • May 26th

People who viewed this item also vieved

Nice!! LATHE LIVE CENTER Good Condition, with #5 Morse Taper

Nice!! LATHE LIVE CENTER Good Condition, with #5 Morse Taper

  • Clatskanie, Oregon, United States
  • Jan 30th
4" Wide Bullnose LIVE CENTER LATHE Good Condition, with #5 Morse Taper

4" Wide Bullnose LIVE CENTER LATHE Good Condition, with #5 Morse Taper

  • Clatskanie, Oregon, United States
  • Jan 30th
LARGE 6" Wide Bullnose LIVE CENTER LATHE OLD WORKS #5 Morse Taper

LARGE 6" Wide Bullnose LIVE CENTER LATHE OLD WORKS #5 Morse Taper

  • Clatskanie, Oregon, United States
  • Jan 30th
CRAFTSMAN 109 METAL LATHE 4 JAW CHUCK

CRAFTSMAN 109 METAL LATHE 4 JAW CHUCK

  • Soquel, California, United States
  • Jan 30th
3-jaw low profile lathe chuck, 36" diameter

3-jaw low profile lathe chuck, 36" diameter

  • Lewisville, Pennsylvania, United States
  • Jan 30th
Bullard 46" 4-jaw chuck

Bullard 46" 4-jaw chuck

  • Lewisville, Pennsylvania, United States
  • Jan 30th
20 Draw clecos 3/16"

20 Draw clecos 3/16"

  • Troy, Missouri, United States
  • Jan 30th
Clamping Kits End Clamp Flange Coupling Nut Step Block Set etc BIG LOT

Clamping Kits End Clamp Flange Coupling Nut Step Block Set etc BIG LOT

  • Berlin, Connecticut, United States
  • Jan 30th
Four Hold Down Clamps

Four Hold Down Clamps

  • Huntsville, Alabama, United States
  • Jan 30th
MACHINIST TOOLS LATHE MILL Lot of NICE 5C Collet s Some Hardinge All USA

MACHINIST TOOLS LATHE MILL Lot of NICE 5C Collet s Some Hardinge All USA

  • Morris Plains, New Jersey, United States
  • Jan 30th
HARDINGE 5C LATHE COLLET 3/4" SQUARE

HARDINGE 5C LATHE COLLET 3/4" SQUARE

  • Oroville, California, United States
  • Jan 30th
MODEL NO. 24 5C COLLET INDEXING FIXTURE W/ HARDINGE 3/4" 5C COLLET

MODEL NO. 24 5C COLLET INDEXING FIXTURE W/ HARDINGE 3/4" 5C COLLET

  • Bay Village, Ohio, United States
  • Jan 30th
HUOT #50526 BT40 HEAVY DUTY TOOLHOLDER VISE TIGHTENING FIXTURE

HUOT #50526 BT40 HEAVY DUTY TOOLHOLDER VISE TIGHTENING FIXTURE

  • Huntington Beach, California, United States
  • Jan 30th
84" x 84" GIDDINGS & LEWIS POWER DRIVEN AUXILIARY SLIDE - #25669

84" x 84" GIDDINGS & LEWIS POWER DRIVEN AUXILIARY SLIDE - #25669

  • Cincinnati, Ohio, United States
  • Jan 30th
24" x 18" x 6" STARRETT PINK-GRANITE SURFACE PLATE - 25165

24" x 18" x 6" STARRETT PINK-GRANITE SURFACE PLATE - 25165

  • Cincinnati, Ohio, United States
  • Jan 30th
Peterson Tool Company 5050-3876 Anvil

Peterson Tool Company 5050-3876 Anvil

  • Peoria, Illinois, United States
  • Jan 30th
7.0" Stainless Plate Tool

7.0" Stainless Plate Tool

  • Peoria, Illinois, United States
  • Jan 30th
EXCELLENT BROWN & SHARPE 1/2" DRIVER DOG TOOL 4 LATHE MACHINIST

EXCELLENT BROWN & SHARPE 1/2" DRIVER DOG TOOL 4 LATHE MACHINIST

  • United States
  • Jan 30th
BROWN & SHARPE 3/8"X1/2"X6" LONG #920 PARALLELS

BROWN & SHARPE 3/8"X1/2"X6" LONG #920 PARALLELS

  • Kernersville, North Carolina, United States
  • Mar 1st
STARRETT #54 TOOLMAKERS HOLD DOWNS MADE IN USA

STARRETT #54 TOOLMAKERS HOLD DOWNS MADE IN USA

  • Kernersville, North Carolina, United States
  • Mar 1st
Starrett V Blocks 268A 1 1/8" Capacity

Starrett V Blocks 268A 1 1/8" Capacity

  • Perryville, Maryland, United States
  • Mar 1st
Vintage 8" Cross Slide Rotary Table Craftsman Palmgren Atlas drill Press R#0188

Vintage 8" Cross Slide Rotary Table Craftsman Palmgren Atlas drill Press R#0188

  • Dayton, Ohio, United States
  • Mar 3rd
MACHINIST LATHE MILL NICE 8" Craftsman 3 Axis Rotary Table for Milling Machine

MACHINIST LATHE MILL NICE 8" Craftsman 3 Axis Rotary Table for Milling Machine

  • Zachary, Louisiana, United States
  • Mar 3rd
WALTER 31" INDEXING HORIZONTAL ROTARY TABLE RT-800TG

WALTER 31" INDEXING HORIZONTAL ROTARY TABLE RT-800TG

  • La Puente, California, United States
  • Mar 4th
Jacobs collet chuck Model 50 with Set Of 10 Collets In Case

Jacobs collet chuck Model 50 with Set Of 10 Collets In Case

  • Alpena, Michigan, United States
  • Mar 6th
5C Collet Block Chuck Set for 5 C collets

5C Collet Block Chuck Set for 5 C collets

  • Moneta, Virginia, United States
  • Mar 6th
Erickson 1015601 Collet Chuck Double Angle Collet Series: DA100

Erickson 1015601 Collet Chuck Double Angle Collet Series: DA100

  • Saint Peters, Missouri, United States
  • Mar 6th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies