Mitutoyo QUICKmini Thickness Gauge/MicrometerMeasures 0" - 0.5"Digital with Absolute CapabilityPrecision Measuring Equipment Product DescriptionDigital Thickness Gage, Graduations 0.0005 In, Range 0-0.5 In, Throat Depth 0.77 In, Flat Contact Diameter 0.2 In, Checks Thickness of Materials Up to 1/2 In, Includes B
STARRETT 0-1 INCH MICROMETER MADE IN THE USA. IT HAS THOUSANDTHS TRANSLATED INTO FRACTIONAL INCHES AROUND THE BARREL. NO BOX, WILL BE PACKAGED CAREFULLY.
You are bidding on one (1) used Mitutoyo Micrometer Head # 152-391 The unit is in working order and turns smoothly. It has some cosmetic scratches on the far side of the body opposite the measurement scale which would normally never be seen once installed. There is some light surface wear on the end face of the knob around the thumb wheel.
This a Starrett 0-1 inch outside micrometer , well used but well cared for and works just fine. A small chip in the coating on the rear of the frame shown in photo # 3 is the only fault . It is engraved but everything else works well and readings of 0.0001 can be read with this micrometer, with a spring loaded thimble marked in red .
Lufkin No. 1941 0" to 1" inch Caliper Micrometer Vintage Antique. Has been used, handle seems to turn freely, small lever handle stops turning measuring movement.
Lot of 3 Vintage Micrometers Brown & Sharpe 0-1", 1-2", 2-3" Vintage, 59, 61A, 63 the 0-1 and 1-2 have ratchets, the 1-2 has a vernier. these came from a retired machinist and were well cared for with papers shown and 2 wrenches and boxes. Free shipping to USA
You are bidding on a set of 0-6 micrometers. They have had very little use and are in excellent condition. The box has scratches and top layer of box is starting to delaminate.
Vintage Starrett No. 230 0 - 1 Inch Micrometer Machinist Tool Nice Original Wood Box Note: Buying as is: Please check out our photographs to see more detail on any damage, etc. Please feel free to use the enlargement and zoom features to be sure you get a good overall view of this item.
Brown & Sharpe Inch DIGIT-Mike Micrometer - Swiss Made - #599-10-1 SELLING THIS MIKE NOT CALIBRATED NOT TESTED NUMBERS TURN FREELY SETS TO 0 SMALL CRACK ON GLASS LOOKS IN GOOD SHAPE
1-2" Outside Mitutoyo Micrometer. #159-212. This unit is called a " Combimike" because it reads the Metric measurement with the mechanical digital counter, and inch reading on the thimble.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
