0.16 oz for sale, brand-new and used.

Omega RSTX-201 Resistivity Transmitter PLEASE READ THE FULL DESCRIPTION By bidding on this item you accept the terms stated below. Up for auction is a used Omega Model RSTX-201 Non-Indicating Two-Wire Resistivity Transmitter. This device is in good cosmetic condition with few signs of wear and use.

PFXGP4301TADW HMI 5.7" 320*240 DC24V with Ethernet New PFXGP4301TADW specifications:

Bourns H-22-6A Counting Dial, 0-15 Turns ! NEW ! Used with precision potentiometers or other rotating devices for up to 15 turns.

You are purchasing a quantity of 5 relays. Factory data sheet available on request. Brand new, surplus stock, guaranteed to work.

If you are looking to outfit your control panel with timers that have an attractive LED display, consider the new PTC-20 series that deliver functionality at competitive prices. Designed for you to best fit the correct timer to your application, the PTC-20 series is divided into three separate models. The PTC-21 base unit offers five field-selectable operating modes and time ranges as well as a host of other convenient features.

2005UD6G.68 New Sanyo Denki, Ball Bearing, 2 Phase 42MM Square (1.65 inch sq.), 5.3 OHM, 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 103H5208-10U41. Each bid quantity is for One (1) Motor. You may bid / buy any number, up to the total quantity available above.

Igarashi 12 VDC Motor - 4500 RPM - 12 V - Toy Car and Hobby Motor - High Torque Motor manufactured by Igarashi Removed from new equipment. Motor may have traces of solder on terminals Operates on 12 VDC nominal Recommended operating voltage range 6 VDC to 15 VDC No load speed at 12 V: 4,500 RPM No load current: 50 mA Full load (maximum efficiency @ 12 VDC) performance characteristics: Spe

Small DC Electric Motor 01-03 VDC 3000rpm 1 oz. M09 Manufactured by - General Electric - Made in USA Nominal Voltage - 3 VDC Voltage Range - 1 to 3 VDC Current - 2.5 Amp Speed (RPM) - 3000 Torque (g-cm) - 1 oz. Very Strong Shaft Diameter - 0.093" Shaft Length - 3/16" Flatted Body Size - Dia - 1 7/16" Body Size - Depth-1.0" Model Number -

10 X Mabuchi RS-555 PH Motors - 12V - 4500 RPM - High Torque Motors Brand new motors Manufacturer: Mabuchi Model: RS555 PH - 3255 You will receive 10 motors Operates on 12 VDC nominal No load speed: 5500 RPM No load current: .18 A Full load torque: 380 g-cm (5.3 oz-in) Rated speed: 4500 RPM Full load current: 2.4 A Stall torque: 1360 g-cm (18.9 oz-in) Stall current: 11.8 A 5 pole armature

5 X Mabuchi RS-555 PH Motors - 12V - 4500 RPM - High Torque Motors Brand new motors Manufacturer: Mabuchi Model: RS555 PH - 3255 You will receive 5 motors Operates on 12 VDC nominal No load speed: 5500 RPM No load current: .18 A Full load torque: 380 g-cm (5.3 oz-in) Rated speed: 4500 RPM Full load current: 2.4 A Stall torque: 1360 g-cm (18.9 oz-in) Stall current: 11.8 A 5 pole armature

100 X Mabuchi RS-555 PH Motors - 12V - 4500 RPM - High Torque Motors Brand new motors Manufacturer: Mabuchi Model: RS555 PH - 3255 You will receive 100 motors Operates on 12 VDC nominal No load speed: 5500 RPM No load current: .18 A Full load torque: 380 g-cm (5.3 oz-in) Rated speed: 4500 RPM Full load current: 2.4 A Stall torque: 1360 g-cm (18.9 oz-in) Stall current: 11.8 A 5 pole armature

Autonics Stepper Motor A63K-G5913, # 5PFE4, 5 Phase, Frame Size NEMA 34/85mm, Shaft Type Solid Shaft, Max Holding Torque 6.18 N--m/874.91 oz-in, Resolution 0.72 deg Full Step, 2.8 Amps Per Phase, Rotor Ineria 4000.0 g-cm2, Winding Resistance 0.86 ohms, Overall Length 5-1/16", Height 2-3/8" Width 2-3/8", Shaft Dia. 14mm, Shaft Length 35mm, Mounting Face, Mounting Pattern 70 x 70mm, Requires Driver 5PFF6, Controller 5PFF8 or 5PFF9, Cable 5PFG0 or 5PFG1, Standards CE, RoHS.

SquareTrade © AP6.0 This is a listing for a good Hewlett Packard Model 608D VHF signal generator. This is a vintage piece that came out of an estate we picked up some HP test & radio gear from. We did power it up and ran some tests to show its modulating and puting out measured output, but we had no probes or manual on it.