If you are looking to outfit your control panel with timers that have an attractive LED display, consider the new PTC-20 series that deliver functionality at competitive prices. Designed for you to best fit the correct timer to your application, the PTC-20 series is divided into three separate models. The PTC-21 base unit offers five field-selectable operating modes and time ranges as well as a host of other convenient features.
2005UD6G.68 New Sanyo Denki, Ball Bearing, 2 Phase 42MM Square (1.65 inch sq.), 5.3 OHM, 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 103H5208-10U41. Each bid quantity is for One (1) Motor. You may bid / buy any number, up to the total quantity available above.
Lin Engineering size NEMA 17 200 s.rev. stepper bipolar (4 wire), 6.0 ohm/phase, @ 0.84 A/phase, 45 in/oz holding torque single shaft measures 0.196" dia and 1/2 " long. The body of the motor measures 1.5" long.
This is a lightly used Omega Engineering pressure transducer PX425-030AV. It has a range of 0-30 psia and PX425 series are millivolt output range, high-stability transducer series (see specs below). Lead is about 1 - 2 inches shorter than original but still very long.
A used Omega PX2650-25D5V Transducer with an AC battery adapter. UNTESTED. It is a differential low pressure transducer with a range of 0 to 25" H2O with a 0.2-5.2 Volt output designed for dry gases with a capacitive sensor.
This item does not come in the original package and does not come with mounting screws. The item was hooked up and tested. Note picture is a stock photo, this listing is for amplifier only
Up for auction is this solid state pressure transducer, 0 to 5 Vdc or 4 to 20 mA Outputs, Vacuum to 300 psi Ranges model number PX219-200GIMy company bought some of these items from Omega for a production project about 2 years ago and we had a few items left over. Below are the specs from the Omega website:
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.