0614 for sale, brand-new and used.

YOU ARE BIDDING ON A SET OF 4 HIGH AMP BRIDGE RECTIFIER MODEL # KBPC2506W 25AMP 600V. THESE ARE NEW NOT PULL OUTS. YOU ARE BIDDING ON A SET OF 4 BRIDGE RECTIFIER, THREE ARE SHOWN FOR DEMOSTRATION PURPOSES.

WE ARE SELLING LED READOUT MADE BY ITRON MODEL# FG85F2 8 SECTION 15 SEGMENT LED DISPLAY NEW THE DEMINSION ARE 2 1/2" BY 1" (QUANTITY AVAILABLE 49 PIECES)BECAUSE OF EBAY LISTING RESTRICTIONS:: EMAIL IF YOU WANT QUANTITIES OF MORE THAN AND I WILL ADJUST THE INVOICE TO FIT THE AMOUNT YOU REQUESTED WITH THE COMBINED SHIPPING TOTAL=================================================================================================================== All sales and items are "as is" and final.

WE ARE SELLING A ELECTRON TUBE MADE BY ITT MODEL# 7213, WE DONT KNOW IF THESE ARE USED ARE NEW THEY HAVE BEEN PACKED VERY WELL INDIVIDUALLY PACKED IN A BOX FOR SHIPPING SO WE THINK THEY ARE NEW BUT WE HAVE NO WAY OF TESTING THEM SO WE ARE SELLING THEM AS-IS. THEY HAVE BEEN IN STORAGE FOR AWHILE SO THEY GOTTEN A LITTLE TARNISHED AS YOU CAN SEE BY THE PICTURES =============================================================== All sales and items are "as is" and final.

WE ARE SELLING A REBUILT ELECTRON TUBE MODEL# 5762 / 7C24 THIS WAS REBUILT BY ECONCO, WHEN I DO NOT KNOW. THESE WERE PULLED OUT OF A DECOMMISIONED RADIO TRANSMITTER SO YES THEY ARE USED. WE DID NOT TEST THEM BECAUSE WE DO NOY HAVE THE EQUIPMENT TO DO SO.

YOU ARE BIDDING ON A ELECTRIC REGULATOR REGOHM REGULATOR 22587X 24-32VDC 50 OHMS REG OHM 22597-1 W/REOSTAT. MEASURES APPROX. 6" X 5" X 4" REF # 547 (QUANTITY AVAILABLE 10 PIECES)BECAUSE OF EBAY LISTING RESTRICTIONS:: EMAIL IF YOU WANT QUANTITIES OF MORE THAN AND I WILL ADJUST THE INVOICE TO FIT THE AMOUNT YOU REQUESTED WITH THE COMBINED SHIPPING TOTAL=============================================================== All sales and items are "as is" and final.

YOU ARE BIDDING ON A BIMBA AIR CYLINDER MODEL# D-11995-A-1 . IT IS 5/8 INCH DIA.AND 5 INCHES LONG WITH A STROKE OF 1 INCH MAKING IT 6 INCHES FULLEY EXTENED (QUANTITY AVAILABLE 19 PIECES)BECAUSE OF EBAY LISTING RESTRICTIONS:: EMAIL IF YOU WANT QUANTITIES OF MORE THAN AND I WILL ADJUST THE INVOICE TO FIT THE AMOUNT YOU REQUESTED WITH THE COMBINED SHIPPING TOTAL=============================================================== All sales and items are "as is" and final.

YOU ARE BIDDING ON (1) A BIMBA AIR CYLINDER MODEL# D-13206-A-2 HAS A 1 INCH IN DIA AND 7 1/2 INCHES LONG INCLUDING ATTACHMENT FITTING, IT HAS A 2INCH STROKE SO THEN FULLY EXTENED WOULD BE 9 1/2 INCHES LONG , THEY DO HAVE SOME KIND OF REGULATER VALVE ATTACHED THAT WE HAVE NO INFORMATION ON THAT ITEM. REF#31 ------------------------------------------------------------------------------------------------------------------------------ All sales and items are "as is" and final.

ITEM DESCRIPTION Okuma Drive BLII-D100A 1006-0614-19-49 Used CLEAN (removed from working equip) SEE PICS (0835) **IMPORTANT** We are unable to test any of our electrical equipment within our warehouse.

WE ARE SELLING CUTLER-HAMMER ADJUSTABLE FREQUENCY DRIVE CAT. NUMBER AF91BGO BOO1D STYLE NO. G1001BG1DB ,1HP INPUT VOLTAGE IS 200-240VOLTS 1/3 PHASE 50/60 HZ OUTPUT VOLTAGE IS 200-230VOLTS 3PHASE 1-360HZ 4.0AMPS.

you are bidding on a EATON cutler hammer MVX9000 frequency drive model #MVX005A0-4 input voltage 380-480VAC 50-60HZ 3PH 8.5A output voltage 0-480VAC 3PH 8.2Amp 5HP frequency range 0.1-400HZ output these units were pulled from some big airconditioners that were working at the time the building was being demolished. they are being sold untested since we dont know how to are dont have the power to test them.

you are bidding on a CUTLER HAMMER VARIABLE FREQUENCY DRIVE CAT. NO. AF91AG0C003D 3HP 380-480 VOLTS 50/60 HZ 5.5AMPS RMS THESE ARE BRAND NEW BUT THEY HAVE BEEN REMOVED FROM THE ORGINAL BOXES & I NO LONGER HAVE THE MANUALS FOR THESE ITEM =============================================================== All sales and items are "as is" and final.

WE ARE SELLINGA ALLEN-BRADLEY MOTOR CONTROLLER CAT.# 22C-D012N103 INPUT 3PHASE 380-480VOLTS 48-63HZ 14.2AMPS OUTPUT 3PHASE 0-460 VOLTS 0-320HZ 12.0AMPS AS YOU CAN SEE FROM THE PICTURE THE FRONT PANEL COVER IS MISSING All sales and items are "as is" and final. I will describe items to the best of my ability. Measurements will be approximate.

WE ARE SELLING A ELECTRAK LINEAR ACTUATOR MODEL# P24-20B5-24RD MADE BY WARNER ELECTRIC Input 24 VDC Stroke Lengths 24 INCH SIZE RETRACTED IS 38 INCHES :4INCH X 8 INCH BASE RATED FOR 1000 POUNDS MAX. All sales and items are "as is" and final. I will describe items to the best of my ability.

WE ARE SELLING A ELECTRAK LINEAR ACTUATOR MODEL# P24-20B5-04RD MADE BY WARNER ELECTRIC Input 24 VDC Stroke Lengths 4 INCH SIZE RETRACTED IS 17 INCHES :4INCH X 8 INCH BASE RATED FOR 1000 POUNDS MAX. All sales and items are "as is" and final. I will describe items to the best of my ability.

1 Rpm Timing Motor 110volts AC, CCW Direction 1/8th inch by 13mm shaft, mounting hole are spaced 46MM apart (QUANTITY AVAILABLE 25 PIECES)BECAUSE OF EBAY LISTING RESTRICTIONS:: EMAIL IF YOU WANT QUANTITIES OF MORE THAN AND I WILL ADJUST THE INVOICE TO FIT THE AMOUNT YOU REQUESTED WITH THE COMBINED SHIPPING TOTAL =============================================================== All sales and items are "as is" and final. I will describe items to the best of my ability.

YOU ARE BIDDING ON A 1 REVOLUTION PER HOUR TIMING MOTOR MADE BY SYCHRON 110 VOLTS AC 60 HZ, THESE ARE NEW NEVER BEEN USED, FISICAL SIZE IS 2 1/4" x 2 1/8" x 2" INCH ;LOOKING AT THE SHAFT IT TURNS COUNTER CLOCKWISE the shft size is approx.

1 REVOLUTION PER MINUTE Timing motor with a 8 sprocket gear Shaft size is 1/8 diia 110Volt AC mounting hole are 1-7/8 inches apart rotation is CW =============================================================== All sales and items are "as is" and final. I will describe items to the best of my ability. Measurements will be approximate.

WE ARE SELLING A GEAR MOTOR REVERSIBLE MODEL# D0824-454 MADE BY ORIENTAL MOTOR 115 VOLTS AC 60HZ 0.85AMPS APPROX 180 RPMS THIS MOTOR IS REVERSIBLE AND REQURES A 12UF CAPACITOR ( NOT iNCLUDED) TO OPERATE 4 screw holes on the face plate measure 2-7/8 inches apart(74mm) the gear box measures 3-1/2 X 3-1/2 inches square the motor is 5-3/4 inches long and the shaft measures 1/2 inches by 1 inch long the gear measure 1-1/2 inch Dia and has 17 sprocketts All sales and items are "as is" and final.

WE ARE SELLING A GEAR MOTOR REVERSIBLE MODEL# 51K40RGK-AA MADE BY ORIENTAL MOTOR 115 VOLTS AC 60HZ 0.83AMPS APPROX 40 RPMS THIS MOTOR IS REVERSIBLE AND REQURES A 8UF CAPACITOR ( NOT iNCLUDED) TO OPERATE (QUANTITY AVAILABLE 10 PIECES)BECAUSE OF EBAY LISTING RESTRICTIONS:: EMAIL IF YOU WANT QUANTITIES OF MORE THAN AND I WILL ADJUST THE INVOICE TO FIT THE AMOUNT YOU REQUESTED WITH THE COMBINED SHIPPING TOTAL All sales and items are "as is" and final.

YOU ARE BIDDING ON A FASCO ELECTRIC MOTOR MODEL#7164-0388 TYPE U64 1/25HP 115VOLTS AC 60HZ, 1.1Amp 12OO RPM, REQUIRE A 3-5 MFD CAP (NOT INCLUDED) MOTOR SIZE IS 6" X 5 1/2" X 3 1/2" THEN THE SHAFT EXTENDS ANOTHER 5 1/8" INCH BY 3/8" INCH (QUANTITY AVAILABLE 20 PIECES)BECAUSE OF EBAY LISTING RESTRICTIONS:: EMAIL IF YOU WANT QUANTITIES OF MORE THAN=============================================================== All sales and items are "as is" and final.