1 1 2 inch fire hose for sale, brand-new and used.

I have a lot of 34 LDH fire hose connectors

I am selling for dirt cheap lay flat material hose this is 1 1/2 inch uses for sump pumps and fire hydrants. I will also throw in all the cam and grove fittings as well that is related to that hose

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

this is a 1 1/2 inch by 100 ft. fire hose tested 250#psi.that was removed from a local school for renovation. the hose is from a pin rack ,condition is unused but soiled .brass couplings.will come with fire hose pin rack

• This is Out of Service hose that was 1.5 inch ID double jacket fire hose. It is great for lining boat docks or other bumper guard type of applications, as well as a chaffing guard for ropes, mooring lines and anything else that will fit inside this 1.75 inch inside diameter hose (see photos, showing hose over a common 1.5 inch PVC plastic pipe).

• This is Out of Service hose that was 1.5 inch ID double jacket fire hose. It is great for lining boat docks or other bumper guard type of applications, as well as a chaffing guard for ropes, mooring lines and anything else that will fit inside this 1.75 inch inside diameter hose (see photos, showing hose over a common 1.5 inch PVC plastic pipe). • This is yellow hose that is now faded and battle scared in

A VINTAGE FIREHOSE FITTING TO FEED ONE FOUR INCH FIRE HOSE WITH TWO THREE INCH FIRE HOSES. PULLED OFF A MASS TRUCK LAST YEAR THIS FITTING COUPLING HAS BACK FLOW PREVENTERS TO PREVENT THE WATER IN THE FOUR INCH HOSE TO FLOW BACK INTO THE THREE INCH HOSES IF THE PRESSURE DROPS IN THE SMALLER HOSES. IT IS MADE FROM CAST ALUMINUM.

Firehose 2.625” wide in 50 ft rolls for boat dock bumper guard & apparel uses • This is Out of Service hose that was 1.5 inch ID single jacket wild land fire hose. It is light-weight, easy to handle and can be used for lining boat docks or other bumper guard type of applications. Because it is single jacket and easy to fold and sew, yet sturdy and durable, it is also highly sought after for repurposing into apparel items such as wallets, backpacks, sus

AVAILABLE FOR SALE FIRE HOSE POLYFLEX 503 SERVICE TEST TO 250 PSI , 1 1/2 INCH , LOCATION : W2FRONTSTORGFTY SHIPPING TO AK , HI AND PR IS MORE MONEY , PLEASE CHECK WITH US BEFORE BUYING .

YOU ARE BIDDING ON A USED 100FT 1-1/2 INCH FIRE HOSE. DATED MAY 2010. VERY GOOD CONDITION.

Logistics SJ75NST 1 1/2" X 75' Fire Hose SJ Brass NST Couplings Single Jacket Fire Hose is made from 100% polyester rubber-lined material for extra strength and flexibility. It has a proof test pressure of 500 psi, a service test of 250 psi, and is FM approved.

(8) double jacket Polyester Fire Hoses 2-1/2" x 50'NH couplings One hose has about a 1/4 inch hole in the outer jacket, see picture; inner jacket, okay. No other holes seen in other hoses. Ponn and other brand.