1 1 4 bolt for sale, brand-new and used.

**PLEASE NOTE, 1 OF 4 is D-RING ONLY NO WASHER AND NUT, THE OTHER 3 HAVE WASHER AND NUT INCLUDED. ALL BRAND NEW, UN-USED** LOT of 4 Concrete D-Ring Anchors. Brand New.

**PLEASE NOTE, 1 OF 4 ARE D-RING ONLY NO WASHER AND NUT, THE OTHER 3 HAVE WASHER AND NUT INCLUDED. ALL BRAND NEW, UN-USED** LOT of 4 Concrete D-Ring Anchors. Brand New.

Lot of (2) brand new INA number GE 20 KRRB 4-bolt flange bearings. These self-aligining bearings have a 20mm ID. Shipping weight: 6 Lbs.

Greenfield Cleveland Twist Drill 1 1/2" NF Theading Die Bolt Rod Threader New a.imagelink {color:#3E4241;} a:hover.imagelink {color:#3E4241;} a:visited.imagelink {color:#3

1 1/8" - NS 8 - N 8 TPI BOLT THREAD TAP - NEW NEW Manufactured by Butterfield 4 Fluted Tap 1 1/8" - NS8 Tap is GH-5 Hardness Bolt Thread Tap Tap is HSG This Listing is for a 1 1/8" NS 8 Butterfield Four Fluted Tap

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16", with knurled nuts, and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 1 set of standard sized, aluminum, "2 hole" pins. One pin has a level vial for easy vertical leveling, and comes with a 360° vial that just "snaps" in for easy replacement. These are also spot faced 15/16" I.D.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Now with Knurled nuts! Hi, up for sale is one lot of 5 sets of 1-1/8 inch O.D., aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16", and are very light weight, but strong.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These will fit small holed flanges, like Duct work Etc., and pipe up to 12" on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16" , and are very light weight, but strong.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. Even 1/2" pipe has 5/8" holes, so these will fit 1/2" pipe up to 12" pipe on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes fro1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Kearney & Trecker Co Milling Cutter 8" x 1.875" Says RESE 8 and F29 on it Has a inner bushing 1-1/4 ID Has 4 Bolt Holes 1/2 id

PARLEC CAT 50 Stub Arbor Shell Mill Holder 1-1/4" Pilot Marked C50-12SM1 I don't have the bolt / screw for holding the mill onto the arbor used condition You get it just as you see in the pictures Posted with eBay Mobile