1 1 4 rigid conduit for sale, brand-new and used.

Welcome to BE Quality Industrial. Most items are purchased from Nuclear Power Plants and all are of the absolute highest standards and quality. You are buying the best of the best for a fraction of the cost.

Crouse Hinds Conduit Outlet Bodies CONDULET Series Item# LB107

One new in Box Thomas and Betts 8821 3" connector. PRINT Rigid/IMC Conduit Fittings T&B Catalog Number: 8821 UPC Number:

GREENLEE MODEL 1800 BENDER: 1/2"; 3/4" & 1" IMC & RIGID CONDUIT.

GREENLEE MODEL 1800 BENDER: 1/2"; 3/4" & 1" IMC & RIGID CONDUIT.

Greenlee roller support for 1/2"- 1-1/4" rigid or imc conduit fits greenlee 555 bender. Good used condition. No tag to positively show it is greenlee but works perfect with greenlee 555 .Greenlee 00936 roller support.

THIS sale is for one (1) Crouse Hinds, Cooper LB1052-CGN 4" LB codulet, gasket, and cover.-0507 pretty nice shape, photo is actual product.

We bought this heater new for heating conduit to install in our house. So it only was used of the course of a couple to a few months and should have a lot of life left in it. It take a couple minutes to warm up, as it did when new but then it heats the pvc nicely and turns it into limp cooked spaghetti until the pvc cools back down at which point it becomes rigid again.  Retails new on amazon for $761.

Up for sale from a retired electrical contractor is a Gardner Bender 933 conduit bender.This GB 933 is a thin wall conduit hand bender with head and handle that bends 1-1/4"-Inch EMT and-1"-Inch rigid conduit as well.It has (2)- built in acrylic level gauges that helps make precise bends in half the time.

Greenlee Ram 885t 501626 Hydraulic Cylinder for Bending Conduit stock# ES02-18-05 885 Strong, yet lightweight, portable, pin-assembled aluminum components Easy-to-use ram travel scale and charts for accurate bends Make elbows, offsets and saddles 885 bends One-Shot 90°s in 1-1/4 IN - 4 IN Rigid conduit Sold as is please inspect and bid accordingly. Will ship at cost! Please take a look at our other Items!

New Greenlee T

This is a Greenlee 777 Conduit Bender intended to bend rigid conduit and Schedule 40 pipe when used with standard bending shoes. It is intended to bend Schedule 80 pipe through XX pipe when used with ductile iron bending shoes. The bender can accomplish a 90 degree bend in one shot when using 1-1/2" to 2" shoes.

var itemNumber = window.ebayItemID ?

Compare to $1550 new!! Evans Offset Bender makes offsets, kicks and saddle bends (0 to 45 degrees, up to 25 inches): - 1/2", 3/4" & 1" EMT - 1/2" & 3/4" IMC - 1/2" & 3/4" rigid and PVC coated Evans Bender weighs 120 pounds assembled, and i

NEW NEVER INSTALLEDACP LB400M 4 INCH MALL. IRON LB CONDUIT BODY W/ROLLERS4 Inch ACP Malleable Form 35, LB Conduit Body 330 CUBIC INCH

Powerful, will blow line or measuring tape in up to 6 IN conduit Portable, lightweight blower has shoulder strap to make it easy to carry and allow the operator to have both hands free Efficient, includes the Mighty Mouser blow gun for fast, easy line blowing Accessory : 618 UPC 16517 Piston For 5.000 IN Conduit, 619 UPC 16951 Piston For 6.000 IN Conduit, 16646 UPC 16646 Adapter For 5.000- 6.000

Product Information Item Name: Thomas & Betts Ocal-Blue GUAT36-G Series Conduit Outlet Box Item

1 1/4" EMT & 1" RIGID Conduit - Benfield Iron Bender Head No.6 with Power Jack Klein Benfield Very Little Use....Stored Inside....from the late 1980's