1 1 8 ratchet wrench for sale, brand-new and used.

Jack Wilkerson Industrial Surplus, LLC.

Up for sale is a Certified Insulated Products 1000 Volt CIP 7 Piece Ratchet Wrench Socket Set . These are used and is in very good physical condition. There are some light scratches and some noalox all over but over all they are in very good shape.

SHARS 2-3" MECHANICAL DIGITAL OUTSIDE MICROMETER .0001" NEW *0-1 MICROMETER PICTURED* Product Code 303-2405 Product description Range: 2-3" Resolution: .0001" Accu

Up for sale is a Certified Insulated Products 1000 Volt CIP 14Pc 1/2" Drive Ratchet Socket Set. These are lightly used and is in very good physical condition. There are some light scratches and some noalox all over but over all they are in very good shape.

Up for bid: Ridgid Pipe Threader as follows: # OOR 5 dies - 1/4" - 3/8" - 1/2" - 3/4" and 1" All dies heads and dies are in excellent condition - no broken or chipped teeth. Comes with ratchet and 16" handle.

New Lowell Wrenches no. 44 - four wrenches per box - Each box comes with four unused Lowell wrenches - If more than one box desired, please contact us -A set of four never been used wrenches in their original box for $450 or can be sold individually in a different box for $130. Dimensions of box: Weight: 80 lbsHeight: 7"Length: 40"Width: 7" Dimensions of ratchet:Length: 3 ft.Socket: 1 5/8" Excell TechnologyOver 35 years of manufacturing experienceLocated in San Carlos, CA 94070(650) 592-6224

1/2 Inch Dr. Scaffold Ratchet Wrench Ratchet Length: 8.5 Inches Extremely Rugged 6 Point 7/8" Socket: Attached with a hardened round head threaded pin to allow socket replacement if damaged or worn. The scaffold ratchet is designed for working with scaffolding and other construction applications Hammer tip reduces vibration and protects fasteners against distortion Weight: 3.15 Lbs

NEW One Hand Cinch Clamp Tool by Apollo PEX Free Shipping!

1/4" & 3/8" Pneumatic Ratchet Wrench Air Tools - for parts or repair / you are buying as is / both in good, used physical condition - no breaks, cracks, etc / appear to be complete - nothing missingBoth tested on pancake compressor at approx 30-38 psi 3/8" ratchet - air comes out of the head, but does not turn / made in Japan1/2" ratchet - air comes out of head & turns, but the part the socket attaches to turns very slowly and can be stopped w/ my fingers / made in Taiwan

Craftsman 1/4" Drive SAE Deep Well Socket Set 9-34781 12-pc, including: 3/16" 7/32" 1/4" 9/32" 5/16" 11/32" 3/8" 7/16" 1/2" 9/16" 3-in extension bar 1/4in ratchet Plastic carry case. Set and case show some signs of cosmetic wear.

Up for bid , craftsman tap wrench ratchet type No. 4064, 15 assortment of taps condition is very good some taps looks like they have never been used, wrench looks the same but has oxidation been in storage for a few yrs. estate find.

var itemNumber = window.ebayItemID ?

1 IN Hex Ratchet Wrench allows use with both 3/8 IN (9.5 mm) and 3/4 IN (19.1 mm) draw studs Includes 34941 Ratchet wrench- 1 IN Hex 721-1/2 1/2 IN Conduit Size Punch 14722 1/2 IN Conduit Size Die

Greenlee 7238SB Slug-Buster Knockout Kit with Ratchet Wrench 1/2" thru 2"

This auction is for a Cementex 1575TW38F 3/8" 15-75 Ft-LB insulated torque wrench. The actual wrench used by Cementex to make the 1575TW38F is a Utica TCI-75FRN. **Could have either part number imprinted on the handle.** Item has been previously used and does have etching on it from previous owner.

Vintage lot of socket wrenches and tools consists of 3 speeders walden penncraft & craftsman be era unmarked  duro l handle 

New in open box. Calibrated 3/2014 SpecsTorque Wrenches; Type: Mil Spec Micrometer Torque Wrench; Drive Size (Inch): 3/8; Maximum Torque (Inch/Lbs): 200.0; Overall Length (Inch): 11-7/8; Minimum Torque (Inch/Lbs): 40.0; Graduation: 1 Type Mil Spec Micrometer Torque Wrench Drive Size (Inch) 3/8 Maximum Torque (Inch/Lbs)