1 1/4 bushing for sale, brand-new and used.

Welcome to BE Quality Industrial. Most items are purchased from Nuclear Power Plants and all are of the absolute highest standards and quality. You are buying the best of the best for a fraction of the cost.

Push-off/Pull-on Reed Switch Push-off/pull-on SPST N.C. switch with hermetically sealed, soft action, low bounce internal reed switch. Magnetic reed switch rated at 5 million operations.

Bourns Rotary Encoder This 3-pin encoder produces a quadrature signal at the A and B channels to allow decoding of the rotational shaft movement. The internal detents are at 15 degree angles, for a total of 24 signals per revolution. There are no end-stops, so the encoder can be continuously rotated.

Lot of 2 Airpax Circuit Breaker Toggle Switch M39019/02-234 NSN 5925-01-041-3930 New. Stored by US Military. In original box; boxes have US Military labels, marks, and shelf wear.

Carlingswitch I-Series Four Pole Toggle Switch 51-02164-017 Carling Technologies for GILLIG Bus The I-Series four pole toggle switches are heavy duty switches, featuring a slow-make, slow-break contact mechanism. They fit the industry standard .500 diameter mounting hole. These switches are available in a wide range of momentary and maintained single throw or double throw circuits, terminations, and bus

This is a used, guaranteed-functional analog turns-counting dial, Beckman Duodial Model RB. A datasheet including dimensions is available at http://www.bitechnologies.com/pdfs/rb.pdf. You attach it to a multi-turn potentiometer or encoder, and the outer dial keeps track of the number of turns the shaft has rotated, while the inner dial shows the

Unused NOS Bourns 82B1D-B20-B15L 10K conductive plastic type linear potentiometer. Slotted shaft for screwdriver adjustment. Optional locking nut (not included) prevents tampering and accidental mis-adjustment.

UP TO 4 NEW THOMSON 5/8" PRECISION BALL OPEN BUSHING BEARINGS SUPER 10 OPN This is a Fixed Auction for up to 4 New in the Box, Thomson 5/8" Precision Open Ball Bushing Bearings, No.Super 10 OPN- Dynamic Load Capacity Lbs: 320 (Pounds). PLEASE NOTE -- Each Bid is for ONE Bearing Gap Angle 15 degrees Gap Width (Min.) .37 inch Groove Length .056 inch Inside Diameter .625 inch Measurement System Inch Len

UP TO 4 NEW THOMSON 5/8" PRECISION BALL BUSHING BEARINGS SUPER 10 This is a Fixed Auction for up to 4 New in the Box, Thomson 5/8" Precision Ball Bushing Bearings, No.Super 10 - Dynamic Load Capacity Lbs: 450 (Pounds). PLEASE NOTE -- Each Bid is for ONE Bearing Outside Dia. 1.1250" Between Grooves (mm) 1.105"