THIS ITEM IS FOR (ONE), SUB - MINIATURE POTENTIOMETER. SPECS: 1K OHM LINEAR TAPER CARBON ELEMENT Stainless-Steel Shaft - 1/8" OD X 1/2"L w/screwdriver slot on end. Body dim, approx.: 3/8" OD X 5/8" Deep including leads, 1/4" bushing mount.
** ALL POTS I SELL ARE TESTED AND GUARANTEED GOOD ** LOT OF 1 (one): CTS VINTAGE POTENTIOMETER W/SWITCH 500K OHM (500,000) +/- 20%, AUDIO TAPER SWITCH: TYPE GC RATED 3A - 125vAC, 1A - 250vAC SPST - N.O. (looking at shaft, full CW, is CLOSED, ON. CCW to max rotation is open, off.
THIS ITEM IS FOR 1 (ONE) PRECISION POTENTIOMETER AS FOLLOWS: VALUE: 10K (10000) OHM 10-TURNS TOL: +/- 5% LIN: +/- 0.5% RATED: 2 WATTS (I think) MADE BY: SPECTROL ELECTRONICS in the USA MODEL: 500-1151 PANEL MOUNT, LOCKING, SCREW DRIVER ADJUST DIM: 7/8" OD X 1 1/2" L BUSHING: 1/2"L made of aluminum. (could b
(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR ONE: HELIPOT PRECISION POTENTIOMETER div. of Beckman Instruments, Inc. Fullerton, CA USA P/N: 5311-50-0 3K OHMS (3,000 OHMS) TOL.: 5% LIN: +/- 0.5% LINEAR TAPER CONTINUOUS ROTATION (NO STOPS) Gold plated, turret solder terminals
(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR ONE: HELIPOT PRECISION POTENTIOMETER div. of Beckman Instruments, Inc. Fullerton, CA USA P/N: 5311-309-0 3K OHMS (3,000 OHMS) TOL.: 5% LIN: +/- 0.5% LINEAR TAPER Gold plated, turret solder terminals DIM: 1 1/2"" OD X 3/4" DEEP
These are 5 NEW CTS American manufactured Potentiometer's . The value is 50K Ohm linear. It's body is 15/16"diameter type X450, 1/3 watt w/11/16" long p.c.
This is a lot of 5 NEW 15K Ohm mini Potentiometer's w/pc terminals. Value: B15 K Ohm Linear Taper Bushing: 7 mm ( 9/32 ) x 1/4" long. Shaft: Split knurled 6 mm ( 1/4 ) x 1/2" long.
These are 5 NEW CTS American manufactured Potentiometer's . The value is 15K Ohm linear. It's body is 15/16"diameter type X450, 1/3 watt w/11/16" long p.c.
This is a lot of 5 NEW 50K Ohm mini Potentiometer's w/solder lugs and mounting Hardware. Value: 50 K Ohm Audio ( Log ) Taper Bushing: 9 mm ( 3/8 ) x 1/4" long. Mounts into a 3/8 hole.
Unused NOS Bourns 82B1D-B20-B15L 10K conductive plastic type linear potentiometer. Slotted shaft for screwdriver adjustment, locking nut prevents tampering and accidental mis-adjustment. Top quality potentiometer for all versions of UREI and UA LA-3A limiting amplifier.
Lot of 10 unused NOS Bourns 82B1D-B20-B15L 10K conductive plastic type linear potentiometer. Slotted shaft for screwdriver adjustment. Optional locking nut (not included) prevents tampering and accidental mis-adjustment.
THIS ITEM IS FOR (one) 1, SPECTROL Model 157 Precision Potentiometer. Resistance: 50K ohm CONTINUOUS ROTATION (no stop) Conductive plastice element Rotational life: 5 million Tol: +/- 20% Lin: 2% Wattage: 1.0 W P/N: Spectrol/Vishay 157B503MX Bushing mount Approx. dim: 7/8" OD X 1/2" deep.
THIS ITEM IS A: BOURNS KNOBPOT, 10-TURN PRECISION POTENTIOMETER: (ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) MFG: BOURNS "KNOBPOT", CLOCKFACE READOUT, 10-TURN P/N: 3600S-1-103 10K OHM (10,000) RES +/- : 5% RATED: 1.5 WATT DIM: 3/4" X 1" in front of panel 3/8" BUSHING Refurbished with washer, mounting nut. All pot
(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR ONE: BOURNS 10-TURN PRECISION WW POTENTIOMETER MODEL 3400-1-502 RESISTANCE: 5K (5000) OHM TOL.: +/- 3% LIN.: 0.15% RATED: 5 WATTS OPER. TEMP: -1 DEG. C to 125 DEG.
10K / 100K Dual Linear Potentiometer 10K / 100K Dual Potentiometer With Solder Lugs 10% Tolerance 100K Top---10K Bottom 1/4" Half-Moon Shaft Bushing: 3/8" Shaft Length: 5/16" Diameter: 15/16" / 24mm Comes with hardware; nut and washer. US Buyers Please Note: Returns and exchanges are accepted within 14 days of the receipt of your item. Please check your item after you receive it, no
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
