NICE 4 PIECE SET OF CONDUIT BENDERS 1 GARDNER 1 1/4" EMT - 1" RIDGID 1 GARDNER 1" EMT - 3/4" RIDGID 1 RIGID 3/4" EMT - 1/2" RIDGID 1 RIGID 1/2" EMT ALL THE BENDERS YOU NEED AT ONE GREAT PRICE I DO HAVE THE HANDLES FOR THESE BENDERS BUT DUE TO SIZE AND WEIGHT DID
Mercoid® Series “D” Pressure Controls feature hermetically sealed mercury switches, Bourdon tube power elements, visible setpoint, adjustable deadband or fixed deadband and pressure ranges from 0-30” Hg. Vac to 800-8000 psig (345 bar). FEATURES • Visible calibrated dial • On/off indication • Adjustable, fixed deadband, or manual reset • External switch setpoint adjustments • Minimum deadband is obtainable at any point in the range • Pressure Ranges of full vacuum to 8000 psig.
The Klein 56211 features bold cast-in symbols, degree scales, multiplier scales and center of bend marks help save time on the job. Our traditional Benfield head design accurately and consistently performs common bends such as Stub Ups, Offsets, Back-to-Back and Saddle Bends. The interior hook surface prevents conduit from rolling or twisting during bends and the wide foot pedal provides excellent stability, leverage and comfort.
O-Z Gedney, Used for joining conduits, or conduit to enclosures or other devices, without rotation of conduits, etc. Allows future access and removal of system components. Trade size 1-1/4", over all length 3-3/16", max Diameter 2-3/4",
O-Z Gedney, Used for joining conduits, or conduit to enclosures or other devices, without rotation of conduits, etc. Allows future access and removal of system components. Trade size 1-3/4", over all length 1-3/4", max Diameter 1-1/2",
O-Z Gedney, Used for joining conduits, or conduit to enclosures or other devices, without rotation of conduits, etc. Allows future access and removal of system components. Trade size 1-1/4", over all length 2-1/4, max Diameter 2-3/4,
(Lot of 100) Erico Caddy K16 170680 Kon-Clip for ConduitNew unused product, Will not ship in factory packaging Features Supports conduit to rod, wire or flange Can also be used for flexible metallic tubing, armored cable, portable cables, control tubes and communications cable No installation t
This is for 1 Box:Ultratite- Liquid-Tight Flexible Metal Conduit 1 Inch 100 feet Dual Listed (GRAY) 1) Flexible metal core liquid-tight conduit 2)Designed for applications at OEMs where UL & CSA approval is required or desirable.3) Approved in US (per NEC) for direct burial applications 4)Suitable for use in hazardous locations per CEC & NEC: Class I, Zone 2 & Div. 2; Class II Div. 1 & 2; Class III Div.
(Lot of 100) Erico Caddy K12 170670 Kon-Clip 3/4" for EMT ConduitNew unused product, Will not ship in factory packaging Features Supports conduit to rod, wire or flange Can also be used for flexible metallic tubing, armored cable, portable cables, control tubes and communications cable No
This listing is for a Greenlee 3 1/2" Conduit Punch Die Stud Nut Set. It was used only a few times so the cutting edge is still very sharp. This set is for 3 1/2" conduit but actually cuts a 4 inch diameter hole.
One person, 2 minute set up and operate Quickly adapts from underground to overhead pulls No need to bolt to the ground on most pulls Able to pull up to 8 ft. of wire out of the conduit 3,000 lbs. peak pulling force Versatile, can adapt to virtually any wire pull
The Marksman Conduit Layout Tool will pinpoint a center knockout in seconds and is designed to accurately install conduit layouts right on the strut line. This conduit layout tool features a panel schedule and accommodates 1/2 - 4 in. knockout sizes.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
