1 1/4 conduit for sale, brand-new and used.

REMKE P#:RSR-0004 CABLE GRIP ALUMINUM .188X.250 P# RSR-0004

Crouse-Hinds Outlet Box This is NEW in box, Condulet from Crouse-Hinds, never used or damaged. Includes: Internal Ground Screw and O-Ring, Internally Threaded Surface Cover with 2" Opening and (2) 1/2" Threaded Hubs. Specifications:

These very high quality plastic enclosures are 100 percent weather resistant, UV resistant, and can be used outside for virtually any electrical project. I have detailed drawings available in the following PDF files: Drawing of Bottom Drawing of Clear Top Drawing of Plastic Screws Nominal Dimensions are 6 3/4" by 6 3/4" by 3" high outside dimensions.

New/other Legrand Wiremold Evolution Series poke thru devices recessed pre-wired assembly with surface style cover, in black. Model 6ATCPBK. Excess/surplus inventory.

Greenlee No. 881 Conduit Bender with

Used Blackhawk 3 " conduit Bender 2"1/2,-2"-,1"1/2-,1"1/4 With Hand Pump Enerpac P 80 10000 BG9L410

This is a clean used very little Burndy brand model B1E34R conduit bender with a 41" steel pipe handle---bends 3/4" ridgid pipe or 1" thinwall pipe----bubble level built in---head is 14 1/2" wide---made in China---no damage and ready for lots of conduit bending

USED: Current Tools P.V.C Conduit Heating Blanket 443 SPECS:PVC Heating Blanket for 3 1/2" to 4" Dimensions - 14 3/8" x 36" (1120 watts/9.33 amp

We bought this heater new for heating conduit to install in our house. So it only was used of the course of a couple to a few months and should have a lot of life left in it. It take a couple minutes to warm up, as it did when new but then it heats the pvc nicely and turns it into limp cooked spaghetti until the pvc cools back down at which point it becomes rigid again.  Retails new on amazon for $761.

Up for sale from a retired electrical contractor is a Gardner Bender 933 conduit bender.This GB 933 is a thin wall conduit hand bender with head and handle that bends 1-1/4"-Inch EMT and-1"-Inch rigid conduit as well.It has (2)- built in acrylic level gauges that helps make precise bends in half the time.

Cast-in-place degree marks facilitate accurate bends Constructed of rugged malleable iron for strength and durability

GREENLEE PVC HEATING BLANKET 860-4 FOR 3 1/2" THUR 4" PVC CONDUIT COMES TO YOU IN: Gently Used Condition WITH INSTRUCTION MANUAL AND ORIGINAL STORAGE SLEEVE

var itemNumber = window.ebayItemID ?

Allen Steel City #525 Hickey Conduit Bender Hard to find item, heavy duty steel. Used to make short radius and segmented bends. Size it is not marked and I am not sure of size, but it looks like it is for 3/4 or 1 inch conduit.

This I believe is a LIDSEEN conduit bender part, I'll call it a saddle. This may fit other manufacturers also. This is a fabricated steel piece.

This listing is for a Greenlee model 770 hydraulic pipe/conduit bender with 5 shoes ranging from 1 1/4 " - 3". This has obviously seen it's fair share of use, but it is still in overall excellent condition. It comes with everything you see pictured and in it's original wooden shipping crate.

WarnerSales Warner See all my listings: WarnerSales

Greenlee EMT Conduit hand bender - 3/4" and 1/2" conduit pipes Posted with eBay Mobile

IDEAL 74-033 conduit bender NEW head only 1"EMT / 3/4" RIGID / 3/4" IMC

WarnerSales Warner See all my listings: WarnerSales