1 1/4 in copper pipe for sale, brand-new and used.

hi, i install air conditioners. here are 4 for sale, i got 12 all together if you need more that 4pc. there are 4 pc of 3/8 in copper pipe nuts that are 1/2 flare.

hi, i fix and install air conditioners. i use pipe kits thet the flare and nuts are already there. so every time i install one i end up with more nuts.

1.5 inch OD Vibration Absorbing flexible copper coupling measures 14-3/4 inch long end to end has 'YPV10 8 94' etched on it, outside diameter of this copper well is 1.5 inches =38.1 mm inside diameter of this copper well is 1.36 inches = 34.7mm

hi, i install air conditioners. there are 7 . brass bleeders 45 degree for gauges.

hi, i install air conditioners. there are 11 pc of 5/8 in. brass 45 degree joiners fittings that the out side is 3/4 in no flare .

Maid-O-MIst model #14 - size 1 1/4" for nominal pipe size copper tee. This is a balancing valve ADAPTER for hot water heating systems. Make sure you read the "NOTICE" in picture number #2 for application information.

ASCO Red Hat general purpose 2-way normally closed solenoid valves will provide On/Off control of air, gas, water. This valve has one inlet and one outlet and does not pass fluid until the coil is energized. Used in a variety of applications including: automated systems, dispensing systems, welding equipment, restaurant equipment, food processing machinery, water treatment systems and laundry equipment.

IMPERIAL EASTMAN 275-FS FLARING AND SWAGING SET 1/4-3/4 OD SOFT COPPER TOLEDO 2-4" TUBING CUTTER (MAY BE PIPE CUTTER, I DON'T KNOW) BOTH ITEMS IN GOOD SHAPE I USED THE FLARING AND SWAGING SET A LOT DURING MY JOBS. THE CUTTER I USED ON 1 JOB WHERE I HAD TO WORK WITH THREE INCH COPPER. LOCAL PICK UP WELCOME

The TurboTorch Nitrogen Flow Meter (Model#: NFM-TT: P/N: 0386-0849) is the perfect choice for purging HVAC or refrigerator lines prior to the brazing process, says the company.

FEDERAL PROCESS GASOILA BT08 QUARTER PINT BRUSH CAN Gasoila® Hard-Set Thread Sealant

Genuine U.S. Military Issue Surplus   Lot of 5 - Threaded Brass Pipe Bushings   We are not sure who manufactured this part, we came up with the following.... Allis Chalmers Corp.

ADD-A-VALVE® Size: 1" (Other available Sizes: 1/2", 3/4", 1 1/4 ", 1 1/2 " & 2") Description Emergency shut off device for copper tubing eliminates shutdowns. Allows replacement of defective valve or installation of new

Leftovers from a job. These are uponor wirsbo MLC brass fittings. All new at a fraction of the supply house cost.

A.Y. McDonald Mfg 1 1/4" CTS (Copper Tube Size) x MNPT (Male National Pipe Thread) Straight Coupling Compression Adapter (4753-22 1 1/4). New, never used.

Auction is for a Lot Of (4) New Steel 3/8" Pipe Plug Fittings for 1 price. Use 5/16" Allen wrench. Shipping will be Calculated which includes Delivery Confirmation.