1 2 bore pulley for sale, brand-new and used.

YOU ARE LOOKING AT A NEW PAPER PULLEY PULLEY WAS MADE BY paper pulleys inc. 2"OD X 3" FACE WERE BELT RUNS X 5/8" BORE.SET SCREW AND KEYWAY. IF YOU HAVE ANY QUESTIONS ARE NEED OTHER SIZE PULLEYS I HAVE MORE TO LIST,LET ME KNOW WHAT YOU NEED.THANKS FOR LOOKING.

Gates TL18H100 PowerGrip Sintered Steel Timing Pulley, 1/2" Pitch, 18 Groove, 2.865" Pitch Diameter, 1/2" to 1-1/4" Bore Range, For 3/4" and 1" Width Belt currently using a 5/8 bore with key not included.

Pulley / Sheave Reducer Sleeve to reduce a 3/4" Bore Pulley, gear, sprocket, wheels,etc. to fit a Small Gas Engine / Motor with a 1/2" Shaft with a 3/16" Keyway slot Length is 3"

This is a NEW IN THE BOX timing pulley. Woods drive, model P40 - 8M - 85 SD. Teeth: 40.

Item Description: Spec.: 35A01Y40 Make: Baldor Frame: 145T HP: .75/.44 Volts: 208-230 Amps: 3.1/2.7 RPM:1725/1140 Hz: 60 Phase: 3 Class: B Enclosure: ODP

Up for auction I have 2 Browning Sheave Pulleys. The first is a 2Bk45 Pulley 2 groove, the second Is a smaller single groove pulley, however I cannot make out the part number. It appears to be A617 or 4617.

NEW MIKI PULLEY SPRFLEX COMPLETE COUPLING MODEL AL-090 a.imagelink {color:#8282fb;} a:hover.imagelink {color:#8282fb;} a:visited.imagelink {color:#0070f3;} a.imagelink img.auctionimage { border: 2px solid #8282fb; } a:visited.imagelink

This is a NICE used Congress Drives Detroit Michigan USA motor pulley 3 " Outside diameter Some wear and tear rust and dust and dirt but in very good working condition. Made of heavy Pot metal or alloy Mounts with a set screw. 1/2" Bore set screw mount.Takes 1/2" wide belts.

This is a NICE used 1 1/2" outside diameter motor pulley Some wear and tear rust and dust and dirt but in very good working condition. Made of stel Mounts with a set screw. 1/2" Bore set screw mount.Takes 1/2" wide belts.

This is a Vintage Large Heavy Pot Metal or Alloy Countershaft 4 step pulley 10-80 from a Vintage 12" Sears Craftsman Metal Lathe #101.07403 with a 2 3/4" gap between bed rails. Has wear and tear dust and dirt some nicks on edges but in good working condition. Has a 3/4" diameter bore with key slot.

This item is a 4-step pulley for Craftsman or Dunlap lathes. The bore is 5/8" in diameter with key way. The diameters of the pulley are from 2" to 4".

I believe this pulley is for a vintage Delta/Rockwell Drill Press but don’t know for certain, it may have other applications as well. (This is an estate find that was in a box with another pulley DP-725 that I am listing separately.) The pulley is in very good condition; I don’t see any cracks, bends, chipping or signs of significant wear. The pulley has a keyed bore approximately 17mm in diameter and has five steps of approximately 2-3/4”, 3-3/4”, 4-3/4”, 5-3/4” and 6-1/2”.

I believe this pulley is for a vintage Delta/Rockwell Drill Press but don’t know for certain, it may have other applications also. (This is an estate find that was in a box with another pulley DP-709 that I am listing separately.) The pulley is in very good condition; I don’t see any cracks, bends, chipping or signs of significant wear. The pulley has a keyed bore approximately 3/4 ” in diameter with two set screw holes.