1 2 coupling for sale, brand-new and used.

FOR SALE IS A BRAND NEW BRASS COPPER DIXON QUICK DISCONNECT. THE NSN IS 4730014816101. THE PART NUMBER IS 52155K64.

FOR SALE ARE 3 BRAND NEW PIONEER QUICK DISCONNECT HYDRAULIC COUPLINGS.THE PART NUMBER IS 8010-4.THE SIZE IS 1/2" - 14 NPTF.YOU WILL RECEIVE ALL 3 AS SHOWN. IF YOU HAVE ANY QUESTIONS AT ALL PLEASE FEEL FREE TO CALL ME 1-614-580-0951.

NOS ( New Old stock) with some surface rust Renold Ajax Pin and Bush Coupling 4-c-1755 Botton part in 5.5" with a hole in the center about 1-5/8 pins are about 3" apart from the inside edges Top part where the 6 holes is also 5.5" , post sticking out is just under 2.5" with a hole in the center about 1-1/4"

Genuine U.S. Military Issue Surplus   Brass Quick Disconnect Hose Coupling   The only markings on the coupling is...   PAT  3,709,528 The overall size is 2 9/16" x 1" Outer Diameter The center hole of the quick disconnect is 1/2" x 1/2" Inner Diameter The threaded area on the one end is 5/8" x 5/16" Threaded Diameter Approximately 24 Threads per Inch The port on the opposite end of the quick disconnect is 3/16" Inner Diameter The quick disconnect hose coupling is made of brass.

HARD TO FIND MALE TO MALE STAINLESS STEEL THREADED COUPLING 1 1/2" WIDE AND APPROX 3" LONG SIDE IS STAMPED M304/L40WMBTTW050084

SPEARS 2 1/2" SCHEDULE 80 CPVC SLIP x SLIP COUPLING

2packs coupling packs 1/2"x1/2" 10count 20 total

The B Camlock Coupler indicates a Female Camlock on one end of the fitting and Male Pipe Threads on the other end. Quality Assurance Control Our factories are audited on an annual schedule. All quality control procedures are reviewed by a team of

Aluminium camlock coupling female barb part C Size 1 1/4" Quality Assurance Control Our factories are audited on an annual schedule. All quality control procedures are reviewed by a team of experienced technical people, including experienced engineers, highly skilled technicians and an efficient production staff who are

I got this coupling at a moving sale and have never personally used it. Its brand new in the packaging. I don't have a way to test it so I'm selling it as untested.

1 Brand new never used 1" Brass sealed coupling to 1/2" with threaded clamp seal

This is one 1/2" flare x 1/2" flare union/coupling (LONG Style) used for ground water service. This comes with two flare nuts per fitting. Unknown manufacturer.

These are Lee Brass or PBF Brands of 1/2" flare x 1/2" flare union/coupling (Short Style) used for ground water service. This comes with two flare nuts per fitting. This is a brand new item but it does not have any packaging due the fact that they came from the manufacturer in larger quantity boxes.

New quickvic 2.5" coupling

NEW Viega ProPress 2 1/2" CxC bronze coupling new and never used.

NEW High-Pressure Socket-Weld 3M Steel Pipe coupling for 1-1/2" x 1" Pipe Use with air, water, oil, natural gas, steam Maximum Pressure: Type 316 SS: 2,570 psi @ 72° F; I have More stuff Similar to this so Don't for get to check out my Ebay Store For More Unbelievable Great Deals!!!