+ Post new Ad
1/2” X 1/2” x 1” x 4” Fastcut 2 flute TiN M7 HSS End Mill -NEW – F10, US $28.00 – Picture 0
1/2” X 1/2” x 1” x 4” Fastcut 2 flute TiN M7 HSS End Mill -NEW – F10, US $28.00 – Picture 0

1/2” X 1/2” X 1” X 4” Fastcut 2 Flute Tin M7 Hss End Mill -new – F10

US $28.00

  • Cleveland, Ohio, United States
  • Jan 30th
Open on mobile:
QR code
1/2” X 1/2” x 1” x 4” Fastcut 2 flute TiN M7 HSS End Mill -NEW – F10 Up for sale 1/2” X 1/2” x 1” x 4” Fastcut 2 flute TiN M7 HSS End Mill -NEW – F10 Mill Diameter: 1/2" Number of Flutes: 2 Material: M7 HSS Finish: TiN Shank Diameter: 1/2" Length of Cut: 1" Overall Length: 4” Length Below Shank: 2-7/32” Cutting Direction: Right Hand – Center Cutting Helix: 30 degree EDP#: 74829 Cutting Diameter tolerance: +.003/-.000 Made in the USA. This item is new in TUBE.  I have other items listed and will gladly combine shipping the best I can.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Primary Application(s) Cavity Die Work, Finish Profiling
Model 748
Material HSS
MPN 74628\9
Coating TiN
Flutes 2-Flute
End Type Single End
Helix Angle 30° Helix
Brand Fastcut
Cutting Diameter 1/2in.

Directions

Similar products from End Mills Router & Drill Bits

cobalt endmill 6 flute 1 5/8 dia of Cut - 4.000 legnth of cut -1.250 shank dia

cobalt endmill 6 flute 1 5/8 dia of Cut - 4.000 legnth of cut -1.250 shank dia

  • La Mirada, California, United States
  • Jan 30th
1" Ball Nose Sgs End Mill Solid Carbide

1" Ball Nose Sgs End Mill Solid Carbide

  • Collierville, Tennessee, United States
  • Jan 30th
USA .793 DIAMETER CARBIDE FLUTE, 1 1/2 LOC END MILL MACHINIST TAPS TOOLS

USA .793 DIAMETER CARBIDE FLUTE, 1 1/2 LOC END MILL MACHINIST TAPS TOOLS

  • Stockton, California, United States
  • Jan 30th
QUINCO .975 " DIAMETER, 3 3/4 " LOC 3/16 CORNER RAD END MILL MACHINIST TAPS

QUINCO .975 " DIAMETER, 3 3/4 " LOC 3/16 CORNER RAD END MILL MACHINIST TAPS

  • Stockton, California, United States
  • Jan 30th
1/4" Brubaker Carbide End Mill 2 flute 3/8" shank 5/8" x 3-1/2” DOUBLE END BALL

1/4" Brubaker Carbide End Mill 2 flute 3/8" shank 5/8" x 3-1/2” DOUBLE END BALL

  • Cleveland, Ohio, United States
  • Jan 30th
1/2” 4 flute 1/2” x 1-1/4” x 3-1/4” Fastcut Bridgeport HSS M7 End Mill -NEW – F1

1/2” 4 flute 1/2” x 1-1/4” x 3-1/4” Fastcut Bridgeport HSS M7 End Mill -NEW – F1

  • Cleveland, Ohio, United States
  • Jan 30th
1/2” X 1/2” x 1” x 4” Fastcut 2 flute M7 HSS End Mill -NEW – F11

1/2” X 1/2” x 1” x 4” Fastcut 2 flute M7 HSS End Mill -NEW – F11

  • Cleveland, Ohio, United States
  • Jan 30th
1/2” X 1/2” x 2” x 4” Brubaker 2 flute M7 HSS End Mill -NEW – B8

1/2” X 1/2” x 2” x 4” Brubaker 2 flute M7 HSS End Mill -NEW – B8

  • Cleveland, Ohio, United States
  • Jan 30th
1/2” 4 flute 1/2” x 2” x 4” Fastcut M42 COBALT NAS986 End Mill -NEW – F4

1/2” 4 flute 1/2” x 2” x 4” Fastcut M42 COBALT NAS986 End Mill -NEW – F4

  • Cleveland, Ohio, United States
  • Jan 30th
1/2” X 1/2” x 2” x 4” Fastcut 2 flute M7 HSS End Mill -NEW – F7-1

1/2” X 1/2” x 2” x 4” Fastcut 2 flute M7 HSS End Mill -NEW – F7-1

  • Cleveland, Ohio, United States
  • Jan 30th
1/2” 4 flute 1/2” x 2” x 4” Fastcut M7 HSS End Mill -NEW – F2

1/2” 4 flute 1/2” x 2” x 4” Fastcut M7 HSS End Mill -NEW – F2

  • Cleveland, Ohio, United States
  • Jan 30th
1/2” X 1/2” x 1” x 3” Fastcut 2 flute M7 HSS End Mill -NEW – F6

1/2” X 1/2” x 1” x 3” Fastcut 2 flute M7 HSS End Mill -NEW – F6

  • Cleveland, Ohio, United States
  • Jan 30th
1/2” 4 flute 1/2” x 2” x 4” Fastcut M7 HSS End Mill -NEW – F3

1/2” 4 flute 1/2” x 2” x 4” Fastcut M7 HSS End Mill -NEW – F3

  • Cleveland, Ohio, United States
  • Jan 30th
1/2” X 1/2” x 1-5/8” x 3-5/8” Brubaker 2 flute M7 HSS End Mill -NEW – B5

1/2” X 1/2” x 1-5/8” x 3-5/8” Brubaker 2 flute M7 HSS End Mill -NEW – B5

  • Cleveland, Ohio, United States
  • Jan 30th
1/2” X 1/2” x 1” x 4” Fastcut 2 flute TiCN M7 HSS End Mill -NEW – F9

1/2” X 1/2” x 1” x 4” Fastcut 2 flute TiCN M7 HSS End Mill -NEW – F9

  • Cleveland, Ohio, United States
  • Jan 30th
Lot 1pcs HSS T Slot Mills Dia 16mm Endmills and Slot 5mm End mill Shank Dia 10mm

Lot 1pcs HSS T Slot Mills Dia 16mm Endmills and Slot 5mm End mill Shank Dia 10mm

  • CN, China
  • Jan 30th
Lot 1pcs 2Flute Hss Long EndMills Cutting Dia 18mm Length 123mm Shank 16mm Mills

Lot 1pcs 2Flute Hss Long EndMills Cutting Dia 18mm Length 123mm Shank 16mm Mills

  • CN, China
  • Jan 30th
FASTCUT 1.25DIA ENDMILL

FASTCUT 1.25DIA ENDMILL

  • West Richland, Washington, United States
  • Jan 30th
COBALT 1/2" x 1-1/4" SE 3 FLUTE ROUGHING END MILL ENDMILL W/ 1/2" SHANK

COBALT 1/2" x 1-1/4" SE 3 FLUTE ROUGHING END MILL ENDMILL W/ 1/2" SHANK

  • Chino, California, United States
  • Jan 30th
7" by 1" horizontal mill cutter

7" by 1" horizontal mill cutter

  • Waterville, New York, United States
  • Jan 30th

People who viewed this item also vieved

Carbide Inserts SNG 634 TIN Qty 8 <684>

Carbide Inserts SNG 634 TIN Qty 8 <684>

  • Saint Louis, Missouri, United States
  • Jan 30th
HERTEL Carbide Turning Inserts TPG320 HC325 HCX41245K USA Qty 10 &lt;614&gt;

HERTEL Carbide Turning Inserts TPG320 HC325 HCX41245K USA Qty 10 <614>

  • Saint Louis, Missouri, United States
  • Jan 30th
NIAGARA Staggered Tooth Side Mill 6&#034; x 11/16&#034; x 1-1/4&#034; Arbor HSS 24T 01600 [687]

NIAGARA Staggered Tooth Side Mill 6" x 11/16" x 1-1/4" Arbor HSS 24T 01600 [687]

  • Saint Louis, Missouri, United States
  • Jan 30th
Side Milling Cutter 6&#034; Dia x 3/8&#034; Cut x 1-1/4&#034; Arbor Straight Tooth HSS [687]

Side Milling Cutter 6" Dia x 3/8" Cut x 1-1/4" Arbor Straight Tooth HSS [687]

  • Saint Louis, Missouri, United States
  • Jan 30th
UNION # 951 ROSE CHUKING REAMER 3/16&#034; STRAIGHT SHANK &amp; FLUTE HS-G NEW

UNION # 951 ROSE CHUKING REAMER 3/16" STRAIGHT SHANK & FLUTE HS-G NEW

  • East Haven, Connecticut, United States
  • Jan 30th
Gammons # 5-0 Helical Pin Reamer HSS New Sealed.

Gammons # 5-0 Helical Pin Reamer HSS New Sealed.

  • East Haven, Connecticut, United States
  • Jan 30th
DWTMHX14X1.5 Thread cutting die NEW

DWTMHX14X1.5 Thread cutting die NEW

  • Bloomfield, Indiana, United States
  • Feb 16th
USED LOT 17 CENTRAL MJ40x1.5 B-18 CR-1 ROLLER THREAD DIES CJ

USED LOT 17 CENTRAL MJ40x1.5 B-18 CR-1 ROLLER THREAD DIES CJ

  • Beltsville, Maryland, United States
  • Feb 16th
GROB 18“ VERTICAL BANDSAW 4V-18~VARIABLE SPEED~ONTARIO, CALIF.

GROB 18“ VERTICAL BANDSAW 4V-18~VARIABLE SPEED~ONTARIO, CALIF.

  • Ontario, California, United States
  • Mar 5th
LENOX GX40494 CLASSIC PRO WELDED BAND SAW BLADE 28 10 X 2.063 X 3/4 VP VR EHS

LENOX GX40494 CLASSIC PRO WELDED BAND SAW BLADE 28 10 X 2.063 X 3/4 VP VR EHS

  • Asheboro, North Carolina, United States
  • Mar 5th
CHAMPION ROTOBRUTE XL300-1-7/8 ANNULAR CUTTER BIT 1-7/8 INCH X 3 INCH USED

CHAMPION ROTOBRUTE XL300-1-7/8 ANNULAR CUTTER BIT 1-7/8 INCH X 3 INCH USED

  • Simpsonville, South Carolina, United States
  • Apr 26th
CHAMPION ROTOBRUTE XL100-1-9/16 ANNULAR CUTTER BIT 1-9/16 INCH X 1 INCH USED

CHAMPION ROTOBRUTE XL100-1-9/16 ANNULAR CUTTER BIT 1-9/16 INCH X 1 INCH USED

  • Simpsonville, South Carolina, United States
  • Apr 26th
OTM WCMX 050308 M-1 OTM66C CARBIDE INSERT 10 PACK

OTM WCMX 050308 M-1 OTM66C CARBIDE INSERT 10 PACK

  • Auburn, Alabama, United States
  • Apr 30th
Carbide ceramic lathe inserts 2950 piece lot VNGA333T 002 20 K060 KENNAMETAL

Carbide ceramic lathe inserts 2950 piece lot VNGA333T 002 20 K060 KENNAMETAL

  • Port Saint Lucie, Florida, United States
  • May 1st
5/8&#034; Type &#034;B&#034; Plain Broach Bushing

5/8" Type "B" Plain Broach Bushing

  • Coventry, Rhode Island, United States
  • May 24th
H.S. Broach Co. 7/8&#034; Style II Collared Broach Bushing

H.S. Broach Co. 7/8" Style II Collared Broach Bushing

  • Coventry, Rhode Island, United States
  • May 24th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies