US $99.99
Condition: |
New other (see details): A new, unused item with absolutely no signs of wear. The item may be missing the original packaging,
or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
...
|
Material | Cobalt |
Flutes | 6-Flute | ||
Coating | TiN | ||
Shank Diameter | 1.250 | ||
End Type | Single End | ||
Overall Length | 6-1/2in. | ||
Brand | Cobalt | ||
Quantity | 1 | ||
Model | Fastcut |
Directions
Similar products from End Mills Router & Drill Bits
Lot 1pcs 3Flute HSS Mills Cutting Dia 12mm End Mill Shank Dia 12mm Endmills
NEW ACCUPRO 1/4" Carbide End Mills (QTY: 4)
NATIONAL SET OF 3, #7, #9, #303 OAL HIGH SPEED WOODRUFF CUTTER, NIB
NEW SGS SOLID CARBIDE END MILL. 5 Flute. 4" OAL. 1.6" LOC. 1 inch dia. Coated
1/4" x 3/8" Shank end mill 2 flute 2-3/8" OAL flute lenght 1/2" Bridgeport
11/32" Data Flute Solid Carbide .020CR TiCN 3 FL End Mill M744
1/2" SGS 4 flute soild carbide lot of 2
3/8" Coarse Tooth Roughing End Mill HSS M42 1 5/8" Length of Cut NEW
1" Ball Nose Sgs End Mill Solid Carbide
USA .793 DIAMETER CARBIDE FLUTE, 1 1/2 LOC END MILL MACHINIST TAPS TOOLS
QUINCO .975 " DIAMETER, 3 3/4 " LOC 3/16 CORNER RAD END MILL MACHINIST TAPS
1/4" Brubaker Carbide End Mill 2 flute 3/8" shank 5/8" x 3-1/2” DOUBLE END BALL
1/2” 4 flute 1/2” x 1-1/4” x 3-1/4” Fastcut Bridgeport HSS M7 End Mill -NEW – F1
1/2” X 1/2” x 1” x 4” Fastcut 2 flute M7 HSS End Mill -NEW – F11
1/2” X 1/2” x 2” x 4” Brubaker 2 flute M7 HSS End Mill -NEW – B8
1/2” 4 flute 1/2” x 2” x 4” Fastcut M42 COBALT NAS986 End Mill -NEW – F4
1/2” X 1/2” x 2” x 4” Fastcut 2 flute M7 HSS End Mill -NEW – F7-1
1/2” X 1/2” x 1” x 4” Fastcut 2 flute TiN M7 HSS End Mill -NEW – F10
People who viewed this item also vieved
SANDVIK CPMT 3(2.5)1-PM 4215 Insert
WHITNEY TOOL T-Slot Cutter 2" x 1/4" x 1" x 5-11/16" HSS 10T *RUSTY* [609]
Side Milling Cutter 6" Dia x 3/4" Cut x 1-1/4" Arbor 24Fl HSS [687]
Spiral flute Reamer #5513 and flat screwdriver bit (For Brace).Square shank
UNION .3175 FLUTED REAMER W-6835 #144 HS-G NEW
Machinist Tool: 2 Sets of Millers Falls Punches, 1/8" Letters and Figures
Leather/Gasket Punch/Cutter Size 1/ 9/16, 1 5/8,1 3/4 1,1 1/16, 1 1/4 Lot of Six
Lenox Classic Welded Band Saw Blade 7'9"x3/4"x.035- 4/6 VP VR
Disston 16BC 14" Chef Saw Blade USA NOS Handsaw for 16C Chef Saw
Two Brand New Double Cut Carbide Burrs
HOUGEN ROTABROACH 3-12230 15/16 INCH X 3 INCH ANNULAR CUTTER WELL USED LOT 6
CARBOLOY TNG-434-F-T3 CERAMIC INSERTS (9 PCS) NEW
OTM WCMX 050308 M-1 OTM66C CARBIDE INSERT 10 PACK
PCM Genevieve Swiss Rotary Broach 3/4" shank, 8mm RBH 2160-190-100 3010-000115
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies