1 3 4 wrench for sale, brand-new and used.

Collet Range: 3/32", 1/8", 3/16", 7/32", 1/4", 5/16", 11/32", 3/8" Collet Size: ER 16 Runout: .015mm/.0006in TIR Coolant Through: Yes Gage Length: 70mm/2.75in Finish: Black Oxide Material: Hardened Alloy Steel Rear Thread: 5/8-11 Taper: CAT 40 Brand: DZ

SHARS 5/8" Keyless drill chuck with Morse Taper 4 Integral Shank 13mm --THIS UNIT DOES NOT CLOSE DOWN TO ZERO-- -- PLEASE REVIEW CAPACITY BEFORE PURCHASE-- Product Code 202-5095A Product description Capacity: 3/32-5/8" Shank Type: Morse Taper 4 Runout: .002" Tang type Product features

SHARS 5/8" Keyless drill chuck with Morse Taper 3 Integral Shank 13mm --THIS UNIT DOES NOT CLOSE DOWN TO ZERO-- -- PLEASE REVIEW CAPACITY BEFORE PURCHASE-- 202-5094A Product description Capacity: 3/32-5/8" Shank Type: Morse Taper 3 Runout: .002" Tang type Product application Integral sha

Extended 5C Collet Stop Set for Hardinge Lathes, Chuckers, Mills, CNC, and others. Note: Easily and Accurately locate parts 7/8” diameter or smaller in any standard 5C collet with internal and external threads (Extender Tube I.D. is .900") 5C Collet Stop’s and Extender Tubes fit inside a 5C spindle with a minimum 1-1/16” I.D.

FastBack Interchange System Based around the patented FastBack Bolt, this quick-change system allows the jaw to be changed in 3 strokes! This greatly increases productivity by reducing vise change setup time. rnrn The jaws change easily without opening the vise or fastening bolts mo

The Hydramax Workholding System The Hydramax Workholding System is designed to allow multiple parts, with variations in size to be secured in a Kurt vise simultaneously. Problems usually associated with attempting to hold multiple parts in one vise are virtually eliminated. Save time and money without the hassles of broken cutters, scraped parts, or damaged fixtures.

The Hydramax Workholding System The Hydramax Workholding System is designed to allow multiple parts, with variations in size to be secured in a Kurt vise simultaneously. Problems usually associated with attempting to hold multiple parts in one vise are virtually eliminated. Save time and money without the hassles of broken cutters, scraped parts, or damaged fixtures.

USED Reed pipe threading wrench & Crafsman dies . die condition OS 3/8-18NPT no broken teeth , OS1/4-18npt no broken teeth , OS1-11 1/2 npt one tooth has a very small chip to the edge , OS3/4-14npt has chips to teeth ( still usable) , 1/2 - 14npt has 1/4 of a tooth missing. Wrench is in good working condition.

RBF Products Adjustable 5C Collet Stop * Up for sale is (1) RBF Products Adjustable 5C Collet Stop. * Condition = New * Made

RBF Products Adjustable 16C Collet Stop

Here is a vintage Airco tank wrench part number 8090028. The wrench is in overall good condition. There is a little mulling over of a corner or two on the open end openings.

CHECK out my Be sure to add me to your favorites list!!! FOR MORE PRODUCT INFORMATION CALL OUR T

CHECK out my !! FOR MORE PRODUCT INFORMATION CALL OUR TOLL FREE NUMBER 800-942-1300

CHECK out my !! FOR MORE PRODUCT INFORMATION CALL OUR TOLL FREE NUMBER 800-942-1300

CHECK out my Be sure to add me to your favorites list!!! FOR MORE PRODUCT INFORMATION CALL OUR T

Untitled Document

The Eliminator RC is a quick change chuck for all 1 /2 inch Bosch routers. The Eliminator will let you change a bit with one hand in less than 10 seconds using only a 5/32" hex key wrench. (not included) The Chuck accepts 1 /2 inch shank bits and we have sleeves available for sale to allow the use of 8mm, 1/8, 1/4 and 3/8 inch bits.

var itemNumber = window.ebayItemID ?