1 3 8 washer for sale, brand-new and used.

8Pcs Flat Washer 3/8 x 7/8 OD, 0.05 Thick - Stainless Steel 18-8 SS - NEW U.S. Fast and Free Shipping in usages : Bike axle washer Axle spacers Car Fender washer Wood working DIY Motorcycle Electric bicycle Cars General Problem Solver Features: Flat Washer Outer Diameter (OD) 7/8 in / 0.875 in / 22.225 mm Inside Diameter (ID) 3/8 in / 0.375 in / 9.525 mm Thickness : 0.05 in / 1.2mm Stainless Steel (18-8-SS) High quietly Item Condition: 100% New

Steel Flat Washer Plain Finish Type 1 1-1/4" Screw Size 1-3/8 ID 2-1/2" OD 0.135 The steel flat washer has a plain finish and meets American Society for Testing and Materials ASTM F436 Type 1 specifications. The flat washer provides a bearing surface for fastener load distribution or is used as a spacer between components. Steel is often used in applications where strength is the primary consideration.

Tail piece washer for coupling nut (#1 in the second diagram) for connection between sink strainer and 1-1/2" tail piece. Size : 1-3/4" OD x 1-3/8" ID x 1/8" thick. Two washers in the pack.

Shark 87113390 Pressure Washer Trigger Gun 5,000 Pressure Washer PSI, 7.6-GPM Description Shark offers the highest quality trigger guns able to withstand pressures of up to 5000 PSI. All are insulated and feature a fatigue-free design for reducing the strain and numbing effect of continuously operating a pressure washer. Features: Insulated for operator protection Fatigue-free design to alleviate numbing

THIS IS A PUMP WITH A 22MM INLET IDEAL FOR REPLACEMENTNew 3000 psi PRESSURE WASHER Water PUMP TROY-BILT 020208 020208-0 020208-1 ALSO FITS GENERAC, TROYBILT KARCHERTHAT MAKES SENSE TO REPLACE WORN OR BROKEN PRESSURE WASHER PUMPS. THIS PUMP IS RATED 3000 PSI @2.5GPM AND WILL REPLACE HORIZONTAL PRESSURE WASHER PUMPS WITH ENGINES THAT HAVE A 3/4" SHAFT. MOST ENGINES BETWEEN 4HP AND 7HP HAVE THAT SIZE SHAFT.

How To Repair Restore Overhaul Old Small Gas Engines One Lung Lawn Mower #381 a.imagelink {color:#6

Brand new in the box pressure washer unloader valve 2,600 PSI max. Specifications Inlet Connection -1/2 in NPTF Outlet Connection - 3/8 in NPTM Pressure Rating -2,650  PSI Adjustable, not factory preset 

[ Brand Name 3000 Max PSI 3/8 In Inside Dia 50 Ft Pressure Washer Hose

[ MI-T-M GC-5004-3MAH 5000 PSI 4.0 GPM 23 HP Gas Cold Water Pressure Washer

USED - Watermaze 30-1600 Wash-Pad & Recycler All In One Drive-on Wash-Pad, Pressure Washer & Waste-Water Recycler(30-765C Serial #: 11034720-157737) (EC1-200S Serial #: W1106-153800) (Hours on Unit: 28.0) (Located In Austin, TX) - Stationary Wash-Pad, Waste-Water Recycler & Pressure Washer.- Zero Discharge Wash-pad & Waste-Water Treatment.

This fender washer is a flat washer with a thinner body and an increased outer diameter offering greater surface bearing. They are chosen when a large outer diameter is required for an increased bearing surface and surface load reduction. Designed for auto body repair, fender washers are commonly used in sheet metal work, plumbing and electrical applications where a large washer diameter is needed.

Attention Detailers and Hood Cleaners. How many times have you had a hard to reach spot in a car you were cleaning, or had that one corner you could not quite get around while cleaning restaurant hoods. We have put together a 45 degree coupler you can easily attach to the end of your wand and then plug in your favorite Quick Coupler Nozzle.

#10 Neoprene EPDM Bonded Sealing Washers Stainless Steel 18-8, Neo Bond, 100 Pieces, Works with Both #8 and #10 Screws (#8 & #10) Size Name: 8 & 10 Bonded Neoprene Washers (also known as sealing washers and cushioning washers) are a specialty washer designed to create an airtight seal between the bolt or screw and the hard surface. The washer spreads stress and strengthens the joint for a high torque application while the rubber washer cushions the joint against the hard surface.

Small Parts 304 Stainless Steel Sealing Washer, Plain Finish, 1/4" Hole Size, 0.2550" ID, 0.0730" Nominal Thickness (Pack of 100)

Included: (1000) 5/8" x 1-3/4" O.D. Hot Dipped Galvanized (HDG) Flat Washers Washers distribute the load of a fastener across a surface and can also be used as spacers, springs, shims, or locking devices. Several different washer styles fit a variety of applications and installation requirements.