1 3 hp electric motor for sale, brand-new and used.

12V HEAVY DUTY ELECTRIC WINCH

Meat GrinderElectric STX INTERNATIONAL STX-3000-TF Turboforce3-SpeedAttachmentsOnly 1 In Stock Order Today!

THIS LISTING IS FOR A NEW ENERPAC PUJ-1201B 10000 PSI ELECTRIC HYDRAULIC PUMP NEW IN ORIGINAL BOX Hydraulic Electric Pump, High Force, Reservoir Capacity (Cu.-In.) 231, Reservoir Capacity (Gal.) 1, Oil Displacement @ 100 PSI 200 cu. in./min., Oil Displacement @ 700 PSI 70 cu. in./min., Oil Displacement @ 10, 000 PSI 20 cu.

This is a new motor in the original box. The box is not in real good shape. This motor has a mounting plate.

This listing is for one (1) very slightly used if at all Bodine Electric gear motor 1/6 Hp, 115 volts, 1 Ph, 1.9 amps, 20:1 ratio, 85 rpm, TEFC. Type # 42R5BFCI-E3 Ser# 0681HNOA0021. The shaft is 3/4" diameter 1 1/2" long.

var itemNumber = window.ebayItemID ?

Motenergy ME1002 DC Series Wound Motor 48-144 VDC 26 kW 35 hp cont / 63 kW 85 hp pk The ME1002 is a Series Wound DC motor perfect for lite truck and small car EV conversions. Continuous current of 200 amps, and 550 amps for 2 minutes. Voltages from 48 to 144 VDC.

60 HP GENERAL ELECTRIC MOTOR 650/2000 RPM 240 VOLT ARM 120 VOLT FLDS DPFG-BV TYPE - CD409AT ARM AMPS 207 FLD AMPS 9.6/3.0 30 MIN DUTY STAB. SHUNT WOUND FLD OHMS 25C 8.9 POWER CODE - E MOD# 5CD204PA002A012 SER# MK-1-1337 MK DPFG-BV ENCL. USED REMOVED FROM SERVICE..

Brand new Electric motor TECO-Westinghouse. HP: 1/2 Volts : 575 3 phases RPM: 3450 HZ: 60 Fr: 56 Cat no: ZA.501TE5 Type : AEFAZA Enclosure : TEFC This is a low weight motor, all in alluminium whit removal base. You can change the base position to put the conduit box on the right or the left side of the motor.

G.E. motor, 3/4hp, GE, .75 hp, 1140 rpm, 48Z frame, 230/460 volts, 200-230/460vac, 3.3-3.8/1.9 amps, 3 phase, 60 hz, ODP, catalog #5K39SN152S, 5K38SN152S, 5K39SN152S, 5K39SN152, 48Z frame, HVAC mounting, .75hp, 1140rpm, 1170 rpm, 1140, 1170, 1200 rpm, 6 pole, 1140rpm, 1170rpm, 48Z frame, G.E., General Electric, .75hp, 3/4 hp, 3 ph, 1140rpm, .50HP, G.E.

Reliance 3 phase 1/2hp 4 pole motor. Unused and still in original OEM box. 56C face with foot mount.

Used very little - was on a HDC band saw that went bad after only using a few times. Motor works fine to my knowledge. 5/8" diameter x 2" long shaft.

up for bid is a older working motor 3/4 Hp,, rpm 3450,,4.6 amps ,,60 cycle 110/230 volts it is CC rotation looking at pulley 2 1/2 stone is 5 1/2 " motor run in both dirictions depending on how you jump start some surface rust run fine once started,, 5/8 shaft shipping based on 50lbs packed Thanks Good Luck

WarnerSales Warner See all my listings: WarnerSales

boston_fincor_pm950tf_1_2_hp_dc_motor_new Policies