Now with Knurled nuts! Hi, up for sale is one lot of 5 sets of 1-1/8 inch O.D., aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16", and are very light weight, but strong.
Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These will fit small holed flanges, like Duct work Etc., and pipe up to 12" on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16" , and are very light weight, but strong.
Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. Even 1/2" pipe has 5/8" holes, so these will fit 1/2" pipe up to 12" pipe on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong.
Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes fro1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.
Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and knurled nuts.
Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.
GENUINE RIDGID 33120 MODEL F-515 CUTTER WHEEL NEW F515 Compatible with the following Ridgid Pipe Cutters: 3S, 4S, 26212, 32830, 32840, 74685, 74700, 74710, 83080, 83085, 83145, 83150, 83165, 83170, 323880 Use for
Brand New! Steel Spring Tubing Benders are a simple and effective means of bending thin-wall tubing without crimping or collapsing the pipe. The Tubing Benders are made from hardened and tempered spring steel with a zinc-plated finish.
PropertiesCOLOR: Off-WhiteAPPLICATION CONSISTENCY: Brush, spray, or palmAVERAGE WEIGHT/U.S. GALLON (ASTM D 1475):10.5 lbs. (1.26 kg/l)AVERAGE NON-VOLATILE (ASTM D 1644):41.5% by volumeCOVERAGE RANGE (FSTM 71):(Subject to the type of surface being coated.)Wet coverages shown below are for smooth non-poroussurfaces.
Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These are turned, and tapered on the threads for EXTREME accuracy, and the threads are tapered on the end with the lathe, and are spot faced on the end for 3/4" decals, which are High Quality, and U.V resistant, polymer domed. These will ship in a 3X3X2 inch, tuck top box.
Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These are turned, and tapered on the threads for EXTREME accuracy, and the threads are tapered on the end with the lathe, and are spot faced on the end for 3/4" decals, which are High Quality, and U.V resistant, polymer domed. These will ship in a 3X3X2 inch, tuck top box.
GF Piping Systems CPVC True Union Ball Valve, FPM Seal, 1/2" Socket/NPT Threaded. Please see the photos for details of the actual valve. CPVC body for use with temperatures higher than those handled by PVC True union construction for in-place valve replacement Standard port for smaller valve size and reduced cost Inline valve for connecting two pipes going in the same direction Soc
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.