How to use Optometry Eyeglass Optical Lens Pattern Cutter How to use 1)Select a liner lens or lens to make template firstly,fix the suction disc in the central position of liner lens or lens,then install them to the chuck device and clamp to
For sale is a New American Specialties Inc. Recessed Stainless Steel C-Fold Paper Towel Dispenser & Disposal. Model #0469 I am willing to be available if buyer wants to arrange shipping.
Scribe commonplace trim lines on galvanized sheet metal quickly and accurately with the Malco A40.. Ten pre-set scribing depths from 1/8” to 1”(3 to 25 mm). Each scribing depth size features a dual edged point to create clean, readable and accurate score lines parallel to the edge of the metal sheet.
NewItemWholesale Store NewItemWholesale Two Way Radio Store Discount Store for Two Way Radio Components Housing: Compact and decorative design. Etched, clear acrylic edge0lit panel. Removable directional indicators.
NewItemWholesale Store NewItemWholesale Two Way Radio Store Discount Store for Two Way Radio Components Housing: Compact and decorative design. Etched, clear acrylic edge0lit panel. Removable directional indicators.
Aluminum Offset Angle 3/4” x 1-1/2” x 8 in, 1/16 in thick, .75 IN x 1.5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. They are very slightly less than a 1/16 of an inch thick.
Aluminum Angle 3/4 x 3/4 x 48 in, 1/8 in thick, NEW!, .75IN, USA! Description – These are fabricated from a 3003 Aluminum Alloy and measure 3/4 x 3/4 x 48 x 1/8 thick. We ship from three locations including NC, OH, and sometimes from our truck.
Aluminum Angle 1-1/2” x 1-1/2” x 21.5 in, 1/16 in thick, 1.5 IN x 1.5 IN, NEW! Description – These are left over from a project. The length varies from 21.5 to 22in long.
Aluminum Angle 1-1/2” x 1-1/2” x 24 in, 1/8 in thick, 1.5 IN x 1.5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed.
Aluminum Angle 1/2 ” x 1/2 ” x 24 in, 1/16 in thick, .5 IN x .5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed.
Cigar Box Saddle / Bridge Aluminum Angle Stock for DIY guitar, fiddle, banjo, Description – This is for anyone who wants to make their own Saddle / Bridge for a Cigar Box instrument. They measure 5/8 x 1-1/2 x 1/8 thick x 48 inch long and you can cut to any length you desire or we can cut for a fee.
Aluminum Offset Angle 3/4” x 1-1/2” x 48 in, 1/16 in thick, .75 IN x 1.5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. They are very slightly less than a 1/16 of an inch thick.
Aluminum Angle 3/4 x 3/4 x 24 in, 1/16 in thick Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed. They are slightly less than a 1/16 of an inch thick.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
