Aluminum Angle 1/2 ” x 1/2 ” x 24 in, 1/16 in thick, .5 IN x .5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed.
Cigar Box Saddle / Bridge Aluminum Angle Stock for DIY guitar, fiddle, banjo, Description – This is for anyone who wants to make their own Saddle / Bridge for a Cigar Box instrument. They measure 5/8 x 1-1/2 x 1/8 thick x 48 inch long and you can cut to any length you desire or we can cut for a fee.
Aluminum Offset Angle 3/4” x 1-1/2” x 48 in, 1/16 in thick, .75 IN x 1.5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. They are very slightly less than a 1/16 of an inch thick.
Aluminum Angle 3/4 x 3/4 x 24 in, 1/16 in thick Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed. They are slightly less than a 1/16 of an inch thick.
Start You Own Metal Business, 10 sizes, Aluminum Angles and Flats Description – This is for anyone who would like to start their own aluminum metal business or for any shop that needs lots of different sizes in their day to day operations. This listing including the display stand, but you can get the angles and flats for $50 less if you have your own di
Aluminum Angle 5/8” x 5/8” x 48 in, 1/16 in thick, 5/8 IN x 5/8 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed.
Aluminum Offset Angle 1” x 2” x 48 in, 1/16 in thick, 1 IN x 2 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed.
Aluminum Angle 2” x 2” x 48 in, 1/16 in thick, 2 x 2 in, NEW!, Angles Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. They are very slightly less than a 1/16 of an inch thick. They measure 2 x 2 x 48 inch.
For pricing or shipping discounts, combination orders, volume discounts, purchasing over the phone, or general information please call me on my cell at: (six, seven, eight,)-(two, zero, zero)-(zero, eight, six, two). Aluminum Angle 1/2 ” x 1/2 ” x 48 in, 1/16 in thick, .5 IN x .5 IN, NEW! Description – When
Aluminum Pro Channel 3/4 x 3/4 x 3/4 x 48 in, 1/16 in thick, .75 in Description – This is a special type of angle that was developed out of my solar panel business for the building of solar panels and eventually I realized other people had lots of other uses for them. How it works is that there are two 3/4 in channels riveted together. You can use the channel as is or, because it has layers, you can cut through one or both layers to create tabs that c
Lamello Profila Pneumatic Details: For precise finishing of edges and milling and bevelling of panels. Finish edges and corners in wood, plastics, resins, and laminates. Great for PVC contour edgebanding due to the "open throat" baseplate design.
Lamello Profila Edge Finisher Details: For precise finishing of edges and milling and bevelling of panels. Finish edges and corners in wood, plastics, resins, and laminates. Great for PVC contour edgebanding due to the "open throat" baseplate design.
Dimensions: 180" L x 48" W x 60" HWeight: 3,000 lbs (estimate)Electrical/Voltage: 220-230 V, 60 Cy, 3 Ph. Cartridge glue system, 3/4" max. edgebanding thickness, 1/4" - 2-1/2" panel thickness and 160 mm min.
Needs new controller & card (Stiles estimate - Approx. $12,500) Otherwise very good condition, cleaned well. Excellent parts machine; has two glue pots valued at $4,000 alone.
2 HORSEPOWER FIXED BASE #1 BEST SELLER ROUTER #1 Winner Best Buy Award The Family Handy Man Magazine A woodworking router that cuts deep into wood, not pocketbooks Great for cabinet making and all other wood projects, this woodworking router produces incredibly clean cuts! The powerful 2 Horse Power motor on this tool spins at a whopping 28,000 RPM! Makes cuts up to 2-3/8 in.
Brand new, never used 1/2" round nose router bit for fluting trim with 1/4" shank. Fits all 1/2" shank routers with a simple adapter usually included in with the router itself. C3 Micrograin Carbide cutting edge provides a good balance of strength and durability.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
