1 4 in wrench for sale, brand-new and used.

SHARS 5/8" Keyless drill chuck with Morse Taper 3 Integral Shank 13mm --THIS UNIT DOES NOT CLOSE DOWN TO ZERO-- -- PLEASE REVIEW CAPACITY BEFORE PURCHASE-- 202-5094A Product description Capacity: 3/32-5/8" Shank Type: Morse Taper 3 Runout: .002" Tang type Product application Integral sha

3pc 5C Collet Stop Set American Made. Extended 5C Collet Stop Set for Hardinge Lathes, Chuckers, Mills, CNC, and others. Note: Easily and Accurately locate parts 7/8” diameter or smaller in any standard 5C collet with internal and external threads (Extender Tube I.D.

Extended 5C Collet Stop Set for Hardinge Lathes, Chuckers, Mills, CNC, and others. Note: Easily and Accurately locate parts 7/8” diameter or smaller in any standard 5C collet with internal and external threads (Extender Tube I.D. is .900") 5C Collet Stop’s and Extender Tubes fit inside a 5C spindle with a minimum 1-1/16” I.D.

FastBack Interchange System Based around the patented FastBack Bolt, this quick-change system allows the jaw to be changed in 3 strokes! This greatly increases productivity by reducing vise change setup time. rnrn The jaws change easily without opening the vise or fastening bolts mo

USED Reed pipe threading wrench & Crafsman dies . die condition OS 3/8-18NPT no broken teeth , OS1/4-18npt no broken teeth , OS1-11 1/2 npt one tooth has a very small chip to the edge , OS3/4-14npt has chips to teeth ( still usable) , 1/2 - 14npt has 1/4 of a tooth missing. Wrench is in good working condition.

RBF Products Adjustable 5C Collet Stop * Up for sale is (1) RBF Products Adjustable 5C Collet Stop. * Condition = New * Made

RBF Products Adjustable 16C Collet Stop

This single-piece stepped drill bit was designed exclusively for drilling concealed holes with the Kreg Deck Jig™. The bit creates an unobtrusive hole on the edge of your deck boards. The bit comes complete with a depth collar that controls the depth of your drill bit when drilling.

The Eliminator RC is a quick change chuck for all 1 /2 inch Bosch routers. The Eliminator will let you change a bit with one hand in less than 10 seconds using only a 5/32" hex key wrench. (not included) The Chuck accepts 1 /2 inch shank bits and we have sleeves available for sale to allow the use of 8mm, 1/8, 1/4 and 3/8 inch bits.

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

Dental turbine cartridge standard for NSK PANA AIR S Handpiece Introduction: This is new brand dental cartridge for dental high speed wrench key lock handpiece. Well balanced ,Quiet, and Durable.

Dental Scaler Handpiece For DTE SATELEC Dental Ultrasonic Piezo Scaler & Tips 1. SANDENT ® Detachable Scaling Handpiece. 2.

var itemNumber = window.ebayItemID ?

5 pcs Dental Turbine/cartridge for NSK Style High Speed Handpiece 1.Original Packed 2.For BS2,BS4,standard wrench PA-S-B2 or M4 High speed handpiece 3.Rotate Speed without load: 400000RPM Max. 4.Applicable Burs: FG Dia.1.59-1.60mm ISO Confirmed. 5.Means for Sterilizing: Prevacuumizing, Autoclavable up to 134°C/273°F Package: 5pcs

We offer up for auction this used excellent condition DMI KAVO 'Gunmetal' small back cap wrench tool. The two prongs on one end measure approximately between 5-6mm or almost 1/4" across. Please see pictures for additional information.

We offer up for auction this used excellent condition DMI KAVO 'Gunmetal' small back cap wrench tool. The two prongs on one end measure approximately between 5-6mm or almost 1/4" across. Please see pictures for additional information.

We offer up for auction this used excellent condition DMI KAVO 'Gunmetal' small back cap wrench tool. The two prongs on one end measure approximately between 5-6mm or almost 1/4" across. Please see pictures for additional information.