1 4 threaded rod for sale, brand-new and used.

.shippingcalculator a { display:block; width: 208px; padding:177px 0px 10px 0p

You're bidding on: - New DAYTON UNIT/GARAGE HEATER 2YU62 5kW ELECTRIC 208V 240V 17000/12600 BTU 1PH/3PH 350cfm - Pictures shown are of the actual unit you'll receive and show EVERYTHING that you'll receive. Basic Specifications from the Manufacturer (taken from the manufacturer's site specs and while deemed correct, buyer should verify these specifications for buyer's application before purchase): kW: 5.0/3.7

Good used 30 ton OTC company cylinder, Very compact 30 ton cylinder, 8 1/2 in tall, 7 1/2 in wide, 4 1/2 in thick, 1 1/4 diameter hole through middle, I think OTC sells a threaded insert & rod for the top, to make adjustments easier. By Owatonna Tool, Owatonna, Minnesota 55060 U.S.A. Weight is 32 pounds will ship in a large flat rate box

Used Power Team 10 ton ram. C1010C Power Team model number, 10-1/8" stroke. 13-3/4 retracted height, 23-7/8 extended height.

YELLOW SIMPLEX 30 TON ,8 1/4 STROKE, SINGLE ACTION SPRING RETURN, 15 3/8 TALL. TUBE THREADED 3.3 IN 12 THREAD. ROD INSIDE THREAD 1 1/2 12 THREAD,THIS JACK WORKS GOOD, I PRESSURE TESTED IT TO 10,000 LBS.

This is a newly machined 47/37 transposing gear set which converts your 8 TPI lead screw to a 2.5 mm pitch. The thread’s crest-to-crest or lead error is only 0.02% or about 0.0025 inch for a one-foot long threaded rod. The transposing gears are under 3 inches in diameter leaving lots of room for closing the gear cover.

May be used as a spindle-adapter for a wood lathe from LatheCity

I HAVE A LATE 90's ONEIDA DUST COLLECTOR IN GREAT CONDIDITON....WORKS GREAT! 1.5 HP AND ABOUT 1100CFM GREAT FOR A HOME SHOP. I AM SELLING BECAUSE MY SHOP SPACE HAS GROWN AND I NEED A BIGGER UNIT SO I AM TRADING UP!

---------------------------------------------------------------- *** ?.. Special limited time holiday pricing ..? *** ---------------------------------------------------------------- Coupling for 1/4" shaft Nema 23 motors ----------------------------------------------------------------

Fiber Optic Tools and Supplies BUY | SELL | TRADE ebay@surpluseq.com SurplusEQ Product ID:253713 Our Description The model 382 post

STURDY ADJUSTABLE TRIPOD LAB STAND 28" SOLID STEEL LABORATORY TOOL RACK Used and in very good condition. Big, sturdy 28" high Solid Steel Adjustable Laboratory Stand, Tripod Base. Rod is 3/4" diameter solid steel.

This is a bargain sale and is for 1 of these, original purchaser paid over $11K each for these,, and selling to clear up space in warehouse, bought from an inventory sell out from an electrical contractor, have original receipt, I installed some of these lights in a labor and delivery room in a 2x2 drop ceiling supported by threaded rod, they work beautiful! these are delicate precision lights and are available for pickup in NJ only, if you want them shipped I can meet the shipper .

ULTRABOND 1 / 10 GALLON KIT Ultrabond 1 Epoxy Anchoring Gel is a two component (1:1 ratio), 100% solids, high modulus, structural epoxy gel. It is a solvent free, no odor, high strength, moisture insensitive, non-sag epoxy system.

Model CMR-50 Number of Sections: 11 Collapsed Length: 66-7/8" The CMR-50Ft / 15.24M Model 90182 is a great tool for fast accurate one-person measuring, the CMR Series is the tool for measuring heights, clearances and horizontal distances. The CMR Measuring Ruler is a direct reading rod at eye level. It is made of rugged, non-conductive fiberglass (NOTE: This product has not been electrically tested as a live line tool).