1 5 hp blower motor for sale, brand-new and used.

Specifications Name PROTECH 51-23017-42 - Blower Motor - 1/4 to 3/4 HP 120/1/60 (1075 rpm/4 speed) Brand PROTECH Manufacturer Product Number 51-23017-42 SKU - PIM Number 1368704510058 ERP Number 45800 UPC 662766187496 Unit of Measure EACH Weight 19.8 Pound (lb.) Length 13.1 Inches (in) Width 7.0 Inches (in) Height 7.1 Inches (in) Hazardous Material No EPA Cert Required

Used 2.5" Welex Extruder Model 200. 24/1 AC, 20 hp Reliance DC motor & 1/3HP blower, belt driven to gearbox, 10:1 gearbox ratio, non-vented, air-cooled, 24:1 L/D ratio, 4 barrel heat zones, 1 adaptor zone, 43" centerline height solid state plug in type instruments, 230 volt, water cooled feed throat, unitized control panel. Approximate Dimensions and Weight: 92” L x 36” W x 82” H 4,200 LBS.

This was used for 2 weeks and does work perfectly!!!!! See pictures of the actual item. You are bidding on ( 1 ) new Source 1, S1-02426029000, 1/15 hp, 230 volt Electric Blower Motor P/N S1-02426029000 HP - 1/15 Volts - 208 - 230 RPM - 850 Amps - 0.5

Office: 830-775-2580 - Customer Service drw02@kingsurplus.com - Shipping quotes: aking@kingsurplus.com Our Asset #:KSC700 / 269 / ABC Qty available:1 24,000 CFM Dust Col

Marathon Carrier EmersonBelted Fan and Blower Split PhaseMotorPART / MODEL NUMBER: #48S17D2109 B208 S87-877HP: 1/2Volts: 115

Sale is for One (1) USED GE GENERAL ELECTRIC FAN MOTOR BLOWER 3/4 HP 3450 RPM 115/230 VOLT 1 PHASE This has light scratches shown in photos This has been tested and makes a little noise from the front bearing that said we ran this for over an hour it does not get hot or show any signs of failure

Baldor Motor

Box has been opened Motor does not come with bracket. Only what is in the picture is provided. Motor Type: Shaded Pole RPM: 1500 HP: 1/15 Volts: 115 Amps: 2.3 Hz: 60 Phase: Single Phase Thermal Protection: Automatic Speeds: 1 Rotation: CW Shaft End Bearings: Sleeve Enclosure Type: Totally Enclosed (TE) Frame Size: 3.3" Frame Motor Diameter (In.): 3.3 Motor Length (In.): 4 1/2 Shaft (In.): 5/16 X 2 5/8 Bolt Circle (In.): 2-27/32 (2.85) Ship Weight: 7 lbs.

Edwards E2M40/EH250 pump blower package. S/N3048FF Pulled working 14 microns pump only, 5 microns with blower running 169 cfm pumping speed standard vacuum pump oil Motor Voltage: 230/460V. 3PH.

Brand new, never used at all. specs: Mfr. Model # 3M778A UNSPSC # 26101602 ItemHVAC Motor Motor ApplicationHVAC/R Motor Sub ApplicationDirect Dr Fan/Blower Motor TypeShaded Pole EnclosureOpen Air-Over DutyContinuous HP1/20 Nameplate RPM1550 Voltage115 Frame3.3 Service Factor1.0 Full Load Amps1.8 Hz60 RotationCWSE Insulation ClassB Max.

Modine Blower Fan replacement electric 1/25 HP, 115V , 1.3A 1550 RPM. Used on various fans and blowers made by lauren Cook, Dayton Modine, Lomanco and others. Brand new motor was dicmounted from discontinued equipment with wire cut off short as seen on the picture.

AO Smith 153A 5.6-Inch Frame Diameter 1/8 HP 1050 RPM 115-Volt 1.8-Amp Sleeve Bearing Blower Motor Box has been opened. Customer ordered motor but didn't pick it up. Selling at below cost in order to get it off the shelf.

Ao Smith universal electric motor. New part taken from Jabsco blower and has never been used. 115v Shaft has flat side and is 1 3/16 tall, 5/16 in dia.

FASCO 1/4 HP CONDENSER FAN BLOWER HVAC 208-230 VOLT 2.1 AMP MOTOR 20" BLADE NEW Up for your consideration is a used FASCO 1/4 HP, 208-230 volt, 2.1 amp, 60Hz, 1075 RPM HVAC motor with a 20" fan blade included. The motor is in excellent physical shape with a 20" square 4 bladed LAU fan attached. The blade P/N is 605587-01, the pitch is 27 CW, and the maximum RPMs is 1140.

UP FOR SALE MOTOR , HERE ARE THE SPECS : Item

Dayton Split Phase 1/3 HP Motor – Model 5K917BA 1/3 HP motor for fans, blowers, pumps, and other uses.

New Emerson Motor made in USA

NEW A.O. SMITH MOTOR 89 Double Shaft Fan/Blower Motor NIB Wiring diagrahm included Description: