1 64 drill bit for sale, brand-new and used.

ONE USED SIZE IS NOT MARKED ON DRILL BIT I MEASURED IT TO BE 2.0410" DIA. NICE DRILL BIT

CLEVELAND TWIST EDP13796 LIST 940E YOU ARE BUYING A QTY OF 2 17/64 LONG FLUTE DRILL BIT NEW OLD STOCK Payment Please plan on paying with 24 hours of auction end. If there are any problems, please contact me. Questions

start_elivehelp_btncodeend_elivehelp_btncode Koolio eBay Template by Finest Design

This drill bit is in very good condition. It doesn't seem as if it was ever used, but there is a mark where it can be seen (in the fourth picture) it was in the receiving end of the taper that was holding it. And the cutting edges were touched up.

NEW!!FREE SHIPPING!! Features and Benefits High Speed Steel (HSS) provides good wear resistance and can be used in general purpose applications on both ferrous and non-ferro

F.B.TOOLS 1 13/32 INCH DIAMETER AND 14 3/4 INCHES OVERALL LENGTH STRAIGHT SHANK TAPER LENGTH 2 FLUTE TWIST DRILL BIT LATHE OR MILL THE STRAIGHT SHANK MEASURES 5 INCHES LONG AND 1 27/64 INCHES IN DIAMETER 1.406 DECIMAL DIAMETER 8 INCHES FLUTE LENGTH 14 3/4 INCHES OVERALL LENGTH THIS BIT WILL NEED TO BE RESHARPENED IT IS STAMPED F.B.TOOLS 1 13/32 SPEEDICUT H.S.

STOCKU COOLANT FED 21/32 INCH DIAMETER AND 12 1/2 INCHES OVERALL LENGTH MORSE NUMBER 2 TAPER SHANK 2 FLUTE TWIST DRILL BIT LATHE OR MILL THE COOLANT ARBOR IS 15/16 INCHES IN DIAMETER, 31/32 INCH TO THE INSIDE DIAMETER OF THE SPRING CLIP AND 13/64 DIAMETER COOLANT FEED CROSS DRILLED HOLE .656 DECIMAL DIAMETER 6 5/8 INCHES FLUTE LENGTH 12 1/2 INCHES OVERALL LENGTH THIS BIT WILL NEED TO BE RESHARPENED

STOCKU COOLANT FED 17/64 INCH DIAMETER AND 13 3/4 INCHES OVERALL LENGTH MORSE NUMBER 2 TAPER SHANK 2 FLUTE TWIST DRILL BIT LATHE OR MILL THE COOLANT ARBOR IS 15/16 INCHES IN DIAMETER, 61/64 INCH TO THE INSIDE DIAMETER OF THE SPRING CLIP AND 13/64 DIAMETER COOLANT FEED CROSS DRILLED HOLE .421 DECIMAL DIAMETER 7 1/2 INCHES FLUTE LENGTH 13 3/4 INCHES OVERALL LENGTH THIS BIT WILL NEED TO BE RESHARPENED

100% Brand New and Free Shipping in USA! Ground from solid 1-piece design is up to 5 times more durable than the current 2-piece conventional product

this auction is for a new 37/64" drill bit it is for a 3/8-18 pipe tap tap not included ship to lower 48

Precision Twist R56CO Cobalt Steel Reduced Shank Drill Bit, Black and Gold Oxide Finish, 1/2" Reduced Shank, 118 Degree Split Point, 49/64" High-speed steel (HSS) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances Combination black oxide and gold finish, improves lubricity, resists corrosion, and will not chip or flake off Half-inch round shank allows larger sized drills to fit into small size chucks Jobber-length drill bits, most com

This is a Morse high speed taper shank 1 7/64 drill bit. It is in good shape. Being sold as pictured.

Description:

About us Shipping