1 7/16 keyed shaft for sale, brand-new and used.

For sale is a new, PARKER Hydraulic Pump/Motor 110A-164-AS-0. This item is in great shape. This item was ordered as a spare motor for a 40 ton Autojector plastics extruder, but it is no longer needed.

UP FOR SALE HYDRAULIC MOTOR PUMP , HERE ARE THE SPECS : Type

Hydraulic Cross Slow 5.2 Motor for Wall Saw CROSS HIGH SPEED HYDRAULIC MOTOR Brand new, Cross hydraulic gear motor. Model 50MH52DBCSC. Pressure balanced loading plates for high efficiency.

This is a NEW surplus, Char Lynn Hydraulic Series 2000 motor. If you have a motor with a different design code (the last 3 digits on the end of the part number) it will replace it as an assembly as long as the first seven numbers are the same. Please note that all surplus items may have some imperfections in the paint or small scuffs and scratches, or other signs of light shelf wear.

HYDROSTAR HYDRAULIC MOTOR MODEL NO.: MRH-30 TS THREAD INFORMATION: OVERALL LENGTH: 5 1/8" SHAFT LENGTH EXCLUDING THREADS: 3 7/32" TAPERED SHAFT 19/32" KEYED KEYWAY BIG END IS 2 11/32" SMALL END 2 1/16" FOR ADDITIONAL INFORMATION ON ITEM PLEASE SEE THE ABOVE PHOTOSPLEASE NOTICE THAT ITEM WILL HAVE SOME SCUFFS, SCRATCHES, ETC. FROM LONGTIME STORAGE.

Commercial hydraulic motor sae b pilot(4") . 2 BOLT MOUNT, 7/8 keyed shaft. 2 5/16 long.

Hydraulic Gear Pump - 22GPM, 2-Stage (Brand New) Features & Specifications The 2-stage pump is excellent for use log splitter, press & machine tools, power units for snow plows, small displacement and modest pressure hydraulic system. It can provide faster cycle times & higher possible pressure with small engine Stages: 2, Clockwise direction GPM: 22 Construction: Extrusion Aluminium Max. Operation Speed: 3600RPM Max.

You are bidding on ( 1 ) new Hydrolec / Anhni BS21150-3.7GPM-0.625-C, Hydraulic Gear Pump P/N BS21150-3.7GPM-0.625-C Series - BHP2 Displacement - 0.49 cu in. / 8 cc Mounting - SAE A, 2 Bolt, Cast Iron Shaft - 5/8" x 1 3/8" Keyed Rotation - CW Ports - 1 1/16"-12 Sae O-Ring / 7/8"-14 SAE O-Ring Max Flow - 3.7 gpm Max Differential Pressure - 3900 psi (cont) / 4100 psi (interm) / 4350 psi (peak) FREE SHIPPING in the USA only. We use Ebay Shipping Calculator to figure our shipping.

Hydraulic Gear Pump, Displacement 2.318 Cu In/Rev, Nominal GPM @ 1200 RPM 12, GPM @ 1800 RPM & 1000 PSI 17.3, GPM @ 3600 RPM & 1000 PSI 33.9, Max Continuous PSI 4000, Max Intermittent Pressure 4000 PSI, Max RPM 3000, Min RPM 700, 2 Bolt B Mounting, Ports 1 5/8-12 Inlet, Ports 1 5/16-12 Outlet, Right Rotation, Shaft Extension 7/8 x 1 5/8 Keyed In, Aluminum Housing, Length 5.68 In, Width 6.9 In.

You are bidding on ( 1 ) new Concentric 1DBD3, 1830487, 2.318 cu in, 7/8" Shaft Hydraulic Gear Pump P/N 1830487 Series - 1DBD3 Displacement - 2.318 cu in Mounting - SAE B 2 Bolt Shaft - 7/8" x 1 5/8" Keyed Rotation - CW Ports - Inlet - 1 5/8"-12, Outlet 1 5/16"-12 SAE O-Ring Min Speed - 700 rpm / Max Speed - 3000 rpm Max Flow 17.3 gpm (cont) / 33.9 gpm (interm) Max Differential Pressure 4000 psi\ FREE SHIPPING in the USA only. We use Ebay Shipping Calculator to figure our shipping.

Title: N

[ Concentric 2107716 3625 psi 2500 RPM Hydraulic Gear Pump

You are bidding on ( 1 ) new Vickers / Eaton, 02-341949, PVQ40, Quiet Series Industrial Piston Hydraulic Pump P/N 02-341949 Model Code - PVQ40AR01AB10G2100000100100CD0A Series - PVQ Displacement - 2.50 cu in / 41 cc Mounting - SAE "B" 2 bolt Shaft - Straight Keyed SAE "B" - 0.88" Dia.

This is a listing for a Masterflex Easy-Load I/P 77601-60 Pump Head W 56C Motor Adapter, 6K233D Motor, Very dirty, but functional. Came out of a solar panel manufacturing plant What you will get: 1 Masterflex Easy-Load I/P 77601-60 Pump Head (Masterflex I/P Easy-Load pump head, PPS housing/SS rotor) 1 56C Motor Adapter (17.8 to 1 Speed Reduction) 1 Dayton 6K233D Magnetic Disk Brake (Sells on Granger for $303.25)

You are bidding on a new PROTECH 51-42179-01 Condenser Motor 1/3 HP 208-230/1/60 1075 rpm/1 speed Description These motors are OEM replacements for Rheem and WeatherKing or Sure Comfortmodels; additionally they may be suitable for aftermarket retrofit in many other applications. Specifications