ARO 2" STROKE STAINLESS AIR CYLINDERS 2418-5089-020 You are bidding on a Stainless Steel piston rod Double Acting Pneumatic Air Cylinders, No. 2418-5089-020 with 2 inches of stroke and a 1 1/8" bore, piston measures 3/8" diameter. Economair round cylinders are medium to heavy-duty units that can be installed anywhere that a repairable cylinder is desired.
NEW BIMBA 2" STROKE DOUBLE WALL AIR CYLINDER 2" BORE DW-312-2 This is a Brand New Pneumatic Bimba Double Acting Double Wall with 2 inches of stroke 5/8" piston threaded on the end, Model DW-312-2. FEATURES Tie Tube: Epoxy coated Aluminum Cylinder Body: Smooth 304 stainless steel Piston Rod: Hard Chrome Plated Pressure Rating: 200 psi Life: 1400 miles of travel when lubricated For more information see: http://www.bimba.com/Global/Library/Catalogs/Bimba%20Catalogs/FL_DoubleWallRSS.p
This auction is for 1 SMC Pneumatic cylinder Part #CDG1UN40-135-B73L New MRO stock from Industrial surplus auction at closed manufacturing company. Cylinder measures 8 1/2" long without rod 1/2" Threaded rod end Includes 2 end limit switches 14 DAY RETURN GUARANTEE
UP TO 6 NEW BIMBA 1" STAINLESS AIR CYLINDERS 041-DB W/BUMPERS This is an Auction for up to 6 Brand New Pneumatic Bimba Front Nose Mounting Double Acting Air Cylinders with Bumpers, Model # 041-DB with 1 inch of stroke and a 1/4"(.250) piston threaded on the end. Each bid is for ONE Cylinder. Cylinder measures .8" Diameter and has 3/4" Bore.
Morse #0 Tailstock spindle (lathe spindle) for UNIMAT SL DB, Tool Steel Other sizes (Craftsman etc.) can be made. UNIMAT SL DB accessory never seen before from LatheCity The package includes:
PNEUMATIC SWING CLAMP, SMC MODEL MK2B40-20R PORTS, G-1/8, SAME AS BRITISH STANDARD PIPE THREADS BORE, 40 MM CLAMPING STROKE, 20 MM ROTATION, CLOCKWISE THREAD IN ROD, M10X1.5 MOUNTING, THREADED HOLES ON BOTH ENDS MAX AIR PRESSURE, 145 PSI / 1.0 MPa
Extended 5C Collet Stop Set for Hardinge Lathes, Chuckers, Mills, CNC, and others. Note: Easily and Accurately locate parts 7/8” diameter or smaller in any standard 5C collet with internal and external threads (Extender Tube I.D. is .900") 5C Collet Stop’s and Extender Tubes fit inside a 5C spindle with a minimum 1-1/16” I.D.
FOR SALE: ONE SET OF TWO ALUMINUM 6061 MACHINIST CLAMPS. CLAMPS ARE SHOWN IN A CNC MILL, BUT THEY ARE GREAT FOR ANY MACHINE OR OTHER USE WHEN YOU NEED TO HOLD. CLAMPS MEASURE 1.75" LONG, .750" WIDE, AND 3/8" THICK AND ARE VERY STRONG.
FOR SALE: ONE SET OF TWO SOLID BRASS MACHINIST CLAMPS. CLAMPS ARE SHOWN IN A CNC MILL, BUT THEY ARE GREAT FOR ANY MACHINE OR OTHER USE WHEN YOU NEED TO HOLD. CLAMPS MEASURE 1.875" LONG, .875" WIDE, AND 3/8" THICK AND ARE VERY STRONG.
RARE SELF-CENTERING VISE/VICE TOOL (Type Mechanism in Hermes Vises / Engraving Vises / Scissor Lifts) SCISSORS LIFT MECHANISM PARTS, DIY New old stock (NOS), minor surface discoloration due to storage. Rare Solid Steel Self-Centering Vise Tool Mechanism Parts Set. This is the same general type of self-centering mechanisms found in the superior Hermes Vises, other Engraving Vises, and small Scissors Lift Platforms.
Aluminum Rod 24" x 2" Dia. 6061-T6511 Temper-Heat Treated. Listed as used because one end has a threaded stud which has a thread depth of less than 1".
PlasmaHelper Plasma Torch Standoff. Keeps your tip off cutting surface, provides stability and a good edge to place against a guide. Threaded 1/4" x 20 so you can make your own attachments if you need.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.