1 8 threaded rod for sale, brand-new and used.

UP TO 2 BIMBA 1 1/2" PNEUMATIC STAINLESS AIR CYLINDERS 021.5-D This is an auction for up to 2 Stainless Steel Pneumatic Double Acting Front Nose Mounting Air Cylinders, No. 021.5-D with 1 1/2 inch of stroke and a 9/16" (.562) inch bore, piston measures 3/16" (.1875) diameter. Each Bid is for ONE Cylinder.

UP TO 4 PHD AIR CYLINDERS 3/8" STROKE W/ SENSORS CTS1U25X3/8-BB-1 This is an Auction for up to 4 Pneumatic Series CTS Double Acting PHD Air Cylinder with Magnetic Sensing, Model CTS1U25X3/8-BB-1 with a 3/8" Stroke and 25MM Bore. Each Bid is for ONE Cylinder. Series CTS Compact Guide Rod Cylinders excel in non-rotating cylinder applications where unit length is critical.

NEW BIMBA 1" STROKE DOUBLE WALL AIR CYLINDER 1 1/2" BORE DWNC-171-4C This is a Brand New Pneumatic Bimba Double Acting Double Wall Air Cylinder with 1 inch of stroke 5/8" piston threaded on the end with air cushions, Model DWNC-171-4C. FEATURES Tie Tube: Epoxy coated Aluminum Cylinder Body: Smooth 304 stainless steel Piston Rod: Hard Chrome Plated Pressure Rating: 200 psi Life: 1400 miles of travel when lubricated For more information see: http://www.bimba.com/Global/Library/Catal

BIMBA 1" PNEUMATIC STAINLESS AIR CYLINDERS MRS-021-D This is an auction for a Stainless Steel Pneumatic Double Acting Front Nose Mounting MRS Magnetic Reed Switch Air Cylinders, No. MRS-021-D with 1 inch of stroke and a 9/16" (.562) inch bore, piston measures 3/16" (.1875) diameter. The "Original," with a "mirror finish" 304 stainless steel body, double-rolled end caps, sintered bronze rod bushing, Buna N "U" cup seals and the specially formulated HT-99 lubricant.

B-LINE BC1 BAG OF 70 BEAM CONDUIT FASTENERS This Listing is for a Bag of Seventy (70) Fasteners. They are New, Never Used Left over from a Job Well Done Condition. New Old Stock, a few pieces have signs of oxidation on them.

Shapeoko 1 CNC Mill/Router Kit - Unassembled This kit was never used and ships in the original box. The motor mount plates have been partially assembled. All other parts and tools needed to assemble and operate, including all electronic components, are included.

--------------------------------------------------------------- Coupling for 1/4" shaft Nema 23 motors ----------------------------------------------------------------

1/2-20 x 1 1/4" L x 5/8" W Hex Coupling Nut, Grade 2, Zinc Plated Sold in sets of 5, shipped free.

50 pack Hex Rod Couplings 3/8-16 x 1/2 x 1-1/8 Threaded Rod Connector Nuts

Rare old, but in excellent condition, metal bar and band bending arbor press. Using the inside rollers, the completed angle is about 100 degrees for a .125" x 1.5" wide aluminum band with an approx. .500" radius.

This is a Vintage Reece Industrial (Commercial) Sewing Machine Cast Iron Foot Pedal. The pedal is in good working order. The surface is worn on top.

· Payment within 5 days of auctions end

25' Magnetic Tape Measure Milwaukee Magnetic Tape Measures are Nothing But Heavy Duty. Using Nylon Blade Protection and a 5-Point Reinforced Frame, they offer up to 10X Longer Blade Life, by resisting contamination wear and increasing protection when dropped. To increase productivity on the jobsite, Milwaukee® Magnetic Tapes feature a new-to-world Dual Magnets, which securely attaches to EMT sticks from belo

35' Magnetic Tape Measure Milwaukee Magnetic Tape Measures are Nothing But Heavy Duty. Using Nylon Blade Protection and a 5-Point Reinforced Frame, they offer up to 10X Longer Blade Life, by resisting contamination wear and increasing protection when dropped. To increase productivity on the jobsite, Magnetic Tapes feature a new-to-world Dual Magnets, which securely attaches to EMT sticks from below and ste

This auction is for the lathe and items pictured. Including the risers for the headstock cross slide and tailstock. Also I added the longer lead screw for the second (rear) cross slide.

linear adjustable table length about 5 5/8'' x 1 3/4'' slide adjustment about 2 3/4" Slide table measures about 1 3/4" x 4" about 2 " high Platform mounting rod measures about 1 " x 3" has 3/8" threaded hole. Table adjustment knobs measure 2" diameter In very good condition

Pack of 25 Sammys® 3/8" Vertical Threaded Rod Anchor - XP 20 8150922 F1 Specifications Product Name

PNEUMATIC CYLINDER, FLAIRLINE #F 3-1/4X6 BORE, 3 1/4" STROKE, 6" PORTS, 1/2" NPT DOUBLE ACTING MOUNTING, THREADED NOSE AND THREADED REAR PIVOT MOUNT, THREAD SIZE 1 5/8"-12 ROD DIAMETER, 1" ROD THREADED, MALE 1"-14 WITH NUT MAX AIR PRESSURE, 150 PSI

-------------------------------------------------------------- **** Special limited stock sale pricing **** ----------------------------------------------------------------