1 cam lock for sale, brand-new and used.

275 - 330 GALLON IBC TOTE TANK ADAPTER 2" NPT Fine x BRASS Hose FAUCET VALVE PLEASE Carefully Check your Valve before ordering... IF You HAVE a Big CONCAVE Groove on your Valve behind the threads this adapter Will NOT fit on your valve and you should not try to use the threads, because they

275 - 330 GALLON IBC TOTE TANK ADAPTER 2" NPT Fine x BRASS Hose FAUCET VALVE comes with Nylon Fitting PLEASE Carefully Check your Valve before ordering... IF You HAVE a Big CONCAVE Groove on your Valve behind the threads this adap

SPEC SERIES® Freezer, Reach-in, -10°F, one-section, stainless steel front, aluminum sides, (1) stainless steel door with lock, cam-lift hinges,  Manufacturer True Refrigeration Also Known As TG1F-1S Cubic Feet 31 Sections 1 Compressor Location Top Mount Voltage 115/60/1 Door Design Full Door Type Solid Shelving Type Wire Exterior Width 27.5 Interior Material Aluminum Supports Casters

Condition: New: A brand-new, unused, unopened, undamaged item in i

1 1/2" SS Cam Lock to Hose

US Lock & Unknown Brand Mortise Cylinders, Set of 2 In good working condition. Kwikset Keyway Adams Rite cam Measures 1" Keyed differently What you see in pictures is what you will receive. Please contact us if you have any questions.

Interstate Standard Collet Holding Fixture Activation Method: Manual Collet Series Compatibility: 5C Orientation Type: Horizontal Lever Type: Cam Lock Positive Release Base Width/Diameter: 3-1/2" Base Length: 4-1/2" Overall Height: 3-3/4"

NOTE: If you are buying Multiples (More Than 2) of this item..... Check Out and Choose PRIORITY MAIL SHIPPING as it will cost less than 1st Class (BE SURE TO VISIT MY eBay STORE TO VIEW ALL THE DIFFERENT ADAPTERS THAT I HAVE AVAILABLE!!) 275 - 330 GALLON IBC TOTE TANK ADAPTER 2" COARSE Thread (M60 x 6) x BRASS Hose FAUCET VALVE PLEASE Carefully Check

FOR SALE IS A BRAND NEW - MILITARY SURPLUS - JGB CAM LOCK PLUG. THIS MALE END CAP IS FOR 2" CAM-LOCK FITTINGS. THE PART NUMBER ON THE PLUG IS DP-200.

For immediate response to questions please contact a sales rep at 800-745-6008, otherwise your questions will be answered as soon as possible. Our Stock Number: 29305 15" BUCK,STEEL 4-JAW MANUAL CHUCK GENERAL SPECIFICATIONS 2-Piece Jaws ( Set of Hard Jaws ) 4-3/16" Thru Hole 4-1/2" Chuck Body Cam Lock Back F.O.B. CINCINNATI OHIO 452

8" 4-Jaw D1-4 Cam-Lock Lathe Chucks Features Direct Mounting chuck with Camlock Nose. Body made of high grade semi-steel. Jaws are individually adjustable, allowing firm gripping of odd shaped work.

This is a brand new, much improved, finger knob for the tightening the rear clamp on your vintage UNISAW fence. This is a easy-to-install replacement knob for tightening the rear clamp's J-hook found on the early style Delta

New "brass bullets" for the locking mechanism on your vintage Unisaw tilt and elevation shafts. Original "bullets" can get mushroomed and worn.... will not effectively lock the shafts in postion when the center hand knob is tightened.