1 fire nozzle for sale, brand-new and used.

AKRON 1 1/2" FOG

Good usable condition Comes as shown in photos. Please look at the photos Will ship by Expedited Mail Service and cost $0.00.

Good usable condition Comes as shown in photos. Please look at the photos Will ship by Expedited Mail Service and cost $0.00.

Good usable condition Comes as shown in photos. Please look at the photos Will ship by Expedited Mail Service and cost $0.00.

Here's a new unused Foam-Flo Nozzle part number 11896, 1"NH. 10 GPM. Manufactured By Cascade Fire Equipment.

15B53.1118 Specs AHZW Integral Strainer

Elkhart Select-O-Matic 1-1/2" Fire Hose nozzle spray gun, SM-20FG For Repair: the hand control lever is bent and bolt that attaches control lever to one side of the nozzle is broken. (See picture.) Saw a repair kit on the internet for $54 that includes a replacement bolt and a new control lever. The square nut on the side turns without a problem, and the valve flow piece on the inside of the nozzle turns at the same time.

Akron Brass Fire/Fog Nozzle 1 1/2 inch fog/stream The handle works freely and the tip is removable. It is 10.5 inches long. 9 lbs.

SEE PICTURES FOR MORE DETAIL OF CONDITION AND TAG INFORMATION, AND READ THE IMPORTANT INFORMATION ABOUT DESCRIPTION (BELOW) !!!! PLEASE CHECK OUT OUR SALE ITEMS IN OUR STORE!!!!

GREAT OLD FIRE HOSE NOZZLE... THANKS FOR CHECKING

ANSUL Fire Protection A-101 Nozzle Package, V-1/2 RETURN POLICY

USED- Landa HOT4-2000Electric Hot Water Pressure Washer(Serial #: P1102-38782) (Location: Austin, TX) *Built in the USA - Electric Motor Powered Pump with Diesel Fired Burner- Burner runs off Diesel Fuel- Unit Electrical Specs: 230Volt 1Phase 25Amps 60Hz- Belt Drive from Engine to Triplex Pump- Burner Max Water Temp. of 225 Degrees F. - Burner BTU: 300,062- Burner Fire Rate: 1.75 GPH- 4 Hard Rubber Tires for Easy Portability- 3.5 GPM @ 2000 PSI - Unit comes with 50Ft.