1 inch pulley for sale, brand-new and used.

Serpentine Belt Tool OEMTools 27115 This OEM 27115 Serpentine Belt Tool services a variety of vehicles equipped with a serpentine accessory drive belt. It provides the required leverage and clearance to release the spring pressure and remove the tensioner pulley. Includes long handle and four shallow 13, 15, 16, and 18mm sockets.

rolling blocks with a six-inch shiv will except up to 1 inch wire rope

Delta Rockwell 17 Inch Drill Press Serial Number 108-3364 Manual Feed with Spring Return No. 2 Morse Taper Spindle with 4-1/2 inches of travel Jacobs 33 Drill Chuck Adjustable Spindle Stop Rack & Pinion Table Height Adjustment Heavy Duty Cast Iron Oil Trough Table with 12-1/2 x 17 inch working surface. 8-1/2

WELCOME TO OUR AUCTION. WE INVITE YOU TO BID ON THIS SOLID BRASS CABLE PULLEY. THE PULLEY HAS A 1/2 INCH HOLE WITH 7/16 INCH GROOVES.

150ft Fiberglass Fish Tape (3.2mm diameter) with Winder Case A fiberglass fish tape is an essential tool that will shave off the time it will take to accomplish your task. The fiberglass extends 150ft and it is flexible enough to guide cables through ducts that have bends in its path. In addition, the fiberglass characteristic is desirable when dealing with ducts that contain electrical wires.

Goodyear Variable Speed Cogged V-Belt 2930V348

Nice.

Timing Belt Pulleys; Pulley Type: Hub & Flanges; Number of Teeth: 12; Inside Diameter: 3/8 (Inch); Outside Diameter: 1.4020 (Decimal Inch); Belt Width: 0.750 (Decimal Inch); Fractional Belt Width: 3/4 Pulley Type Hub & Flanges Number of Teeth 12 Inside Diameter (Inch) 3/8 Outside Diameter (Decimal Inch) 1.4020

A used Sanyo Denki step-syn stepping motor DC 2A 1.8 DEG type 1037126-1841 shaft is 1/4 inch by 3/4 inch comes with free pulley on shaft. I will be listing other stepping motors and will combine shipping

Qty 1, Used Flexidyne drive, is setup for flat belt. Shaft input size 1-5/8, Belt pulley size 1.356, 6 inch scale for Ref only, not included. Please use shipping calculator

Westinghouse AC motor. Thermally protected continuous duty. 5.1amp.

YOU ARE BIDDING ON A NEW IN BOX EMERSON 1/2 HP ELECTRIC 1 SPEED MOTOR, EVAPORATIVE COOLER MOTOR KIT,MADE BY MASTERCOOL CLOCKWISE ROTATION-SHAFT END NON REVERSIBLE 230VOLTS AC 60HZ, 1725 RPM OPEN CONSTRUCTION, 56Z FRAME, SHAFT SIZE IS 1/2" INCH.

YOU ARE BIDDING ON A NEW IN BOX EMERSON 1/2 HP ELECTRIC 2 SPEED MOTOR, EVAPORATIVE COOLER MOTOR KIT,MADE BY MASTERCOOL CLOCKWISE ROTATION-SHAFT END NON REVERSIBLE 230VOLTS AC 60HZ, 1725/1140 RPM OPEN CONSTRUCTION, 56Z FRAME, SHAFT SIZE IS 1/2" INCH.

Speed Selector 6C Variable Speed Pulley 1 " Inch Manufacturer: Speed Selector Model: 6C Type: Variable Speed Pulley New, In working condition.This item is new. Condition: New, if you are not satisfied with this picture please email us with the item number and we will reply with more pictures. Return Policy----------------------- 7 Day Money Back Guarantee We offer a 7 day no questions asked return policy on all items sold.

1-1/2 HP FROM ACCURA WOOD SHAPER-NEW TAKE OFF This motor came from a shaper that we sold to the Amish. They run their machines on a line shaft or with air or hydraulic motors. This allows us the opportunity to sell the motors for replacements to people who need to upgrade or replace a motor on smaller shapers.

2 HP, 3450 RPM USED AO SMITH/ CENTURY 220 VOLT ELECTRIC MOTOR - SINGLE PHASE 48 FRAME Motor was originally a hot tub pump motor. The wet end or pump's bearing fell apart. The 1/2 inch, threaded front shaft has some pitting from water contact.

Congress standardized CA800 Brand new Original packaging Never been used before

MMTC INCLIM-50 GEAR BOX WITH 60 TO 1 RATIO DOUBLE PULLEY ON IN SIDE 3 INCH LONG ARM CENTER TO CENTER ON OUT ARM IS WELDED ON GREY FINISH MADE IN TAIWAN WEIGHT 19 POUNDS Please email any questions.

Please READ EVERYTHING BEFORE bidding. This auction is for; 1 - Congress Drives Division, Acme Precision Products, Inc. - Congress Standarized Pulley.