Motor Drive Pulley #A-1500 and Counter Shaft Pulley #E1514 for XL Series 10" Sheldon Lathe with "E" Type Motor Drive Motor pulley is 3 1/2" OD with 3/4" keyed bore, counter shaft pulley is 9" OD with 15/16" keyed bore, 1/2" top groove width on both, minor wear. No international, ask questions before bidding, always happy to combine shipping when possible.
CMI RP101 PULLEY The original CMI rescue pulley that set the standard for lightweight, compact, yet functional rescue pulleys almost 15 years ago. Now featuring stainless steel axles rp101 accepts up to 5/8? diameter ropes and feature “wide skirt” sideplate design for
CMI RC103 PULLEY Famous original blue pulley. Anodized aluminum sideplates, 2 3/8 inch aluminum sheave, sealed-needle bearing and stainless steel axle. 5/8 inch rope capacity.
This is a Vintage Large Heavy Pot Metal or Alloy Countershaft 4 step pulley 10-80 from a Vintage 12" Sears Craftsman Metal Lathe #101.07403 with a 2 3/4" gap between bed rails. Has wear and tear dust and dirt some nicks on edges but in good working condition. Has a 3/4" diameter bore with key slot.
Fits Asian Mini Lathe 7x10,12, & 14 - Pulley/Belt Speed Reduction Kit Aluminum XL pulleys & belt - there are (2) 4mm set screws on the hub of the small pulley (10 teeth) 3 to 1 reduction instead of OEM 1.82 to 1 (large pulley: 30 teeth) 40% power increase ideal for spinning 4 & 5" chucks (note: this upgrade lowers Max RPM in low gear to approx.
Grease Fitting used to lube the Spindle Pulley&Backgear Shaft On 9,10&13" South Bends With 1/4x20 Threads.These are machined from solid stock with Alemite fittings.
THIS AUCTION IS FOR A "LIKE NEW" MILLPORT STEP PULLEY VERTICAL MILLING MACHINE. MILL STILL HAS RUST PREVENTIVE ON MACHINE! THIS WAS PURCHASED NEW IN 1983 WHEN PERVIOUS OWNER RETIRED!
Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915 and 1916, Volume 2, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2008. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-371-3.
Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2009. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-383-7.
4 piece lot c 1910s the Cincinnati pulley machine co , Kempsmith of Molwaukee , Leblonde Cincinnati and Rockford of ill . has 4 flyers of equipment Nice early items you are buying the paper items only we have no equipment. Could be of historical interest .
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.