1 x 3 4 bushing for sale, brand-new and used.

CNC Toolholder Bushing 3/8” ID x 2” OD, Used: This toolholder bushing in good condition. It measures 4-1/4” long with a 2” solid 3-5/8” body. There are 2 set screws for holding tooling and a ground flat for holding the tool holder in place.

LOT OF TWO (2) 1.00 O.D. x 2.230"LONG HIGH PURITY ALUMINA THICK WALLED SLEEVE BUSHING No.: 282 You are b

New Edward Andrews 1 1/4 ID CNC toolholder bushing. 2" OD X 3.500 long, 68-05B NOTE: ALL MACHINERY IS SOLD AS IS WHERE IS WITH NO WARRANTY OR GUARANTEE. ALL MACHINE SAFEGUARDING AND OSHA REQUIREMENTS ARE THE RESPONSIBILITY OF THE BUYER.

1-013-TL SPB224X3.2517 Ametric® Part Number 991160 SKU No. BSW Taper Bushed V-Pulley 224 mm Outside Diameter (O) 3 Groove SPB/17 Dynamically Balanced Cast Iron V-Belt Pulley / Sheave For 2517 Taper Lock Bushing 4 Type Construction 15 mm Web/Spoke Thickness(E) 63 mm Face Width(F) 181 mm Inside Diameter(J) 0 mm Hub Offset(K) 45 mm Bushing Thru Length(L) 18 mm Hub Offset(M) 117 mm Hub Diameter(N) Price listed is for one V Pulley, with a Taper lock bore -- but without bushing or setscrews.

Schedule 40 pvc Pressure Reducing Bushing 3/4 x 1/2 in white Part #439-101 For Drip Irrigation applications

Killark R-32 1" x 3/4" reducing bushing. 

Global CNC #86-17C Lathe Tool Holder Bushing Type COutside Diameter (Decimal Inch) 3.5000Outside Diameter (Inch) 3-1/2Inside Diameter (Inch) 1-1/4Inside Diameter (Decimal Inch) 1.2500Length Under Head (Inch) 5Length Under Head (Decimal Inc

N O S BRASS BUSHING & BOLT BUSHING 6" LONG X 2-3/8" OD HAS A SQUARE HEAD [has small threaded hole in head ] 1" SHOULDER [1 1/4" ] BOLT & NUT 9" LONG has 4 holes around center of bushing could be for oiling bin 10 b

Highlights: Size: 1/4" x 3/8" Brass fitting Resists rust and will not corrode as easily as other materials All brass air hose bushing with female NPT and male NPT ends Carded

robotics,machine control products, machine controls, sensors, PLC and HMI

NEW IN PLASTIC, LOT OF (11) HILTI Misc. Parts.

CNC Type LB Toolholder Bushing 3/4” ID x 2” OD, Used: This toolholder bushing in good condition. It measures 4-1/4” long with a 2” solid 3-5/8” body that features 4 clearance holes. This allows you to clamp directly onto the cutting tool by using set screws.