1.5 aluminum angle for sale, brand-new and used.

5\16" .312 angle corner 3.5”Aluminum Angle Bracket Lot30, .312 mill stock Thk T6 3.5"x 3.5" x 5/16" Aluminum Angle 6061-T6 lot of 30 brackets / corner

1\4" .25 angle corner 3.5”Aluminum Angle Bracket Lot38, .250 mill stock thk T6 38 Pcs. CORNER BRACE ANGLE BRACKET ALUMINUM T6 .25 thick stock angle corner

5/16" .312 angle corner 3.5”Aluminum Angle Bracket Lot30, .312 mill stock thk T6 30 Pcs. CORNER BRACE ANGLE BRACKET ALUMINUM T6 You are buying 30 pieces only. Remnants all have some light surface scratching, nothing horrible.

1\4" .25 angle corner 3.5”Aluminum Angle Bracket Lot38, .250 mill stock thk T6 38 Pcs. CORNER BRACE ANGLE BRACKET ALUMINUM T6 .25 thick stock angle corner

1\4" .25 angle corner 3.5”Aluminum Angle Bracket Lot38, .250 mill stock thk T6 38 Pcs. CORNER BRACE ANGLE BRACKET ALUMINUM T6 .25 thick stock angle corner

MULTIFUNCTION UPRIGHT DISPLAY DIGITAL ANGLE FINDER PROTRACTOR With Spirit Leve

Aluminum Angle 3/4 x 3/4 x 24 in, 1/16 in thick Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed. They are slightly less than a 1/16 of an inch thick.

FOR SALE Aluminum Piece Shown in Pictures.This has been hidden away in our repair shop for over 30 years. During the restoration of an ultralight aluminum framed aircraft there were so

Note:The first two photos showing the moving jaws are not correct. The moving jaw that comes with this set does not have the 4 vertical "T" slots shown. ************************************** Original Price Of This Angle Jaw Set Was $329-Until The New Configuration &nb

ebay money back policy applies Any machine shop own

Genuine U.S. Military Issue Surplus   Aluminum Angle Plate / Bracket P/N: EE45557 The overall length is 12 1/2" 3" Wide 3/32" Thick (Approximately) The aluminum plate is 5" then it goes at an angle for 3" then it bends and is another 5 1/4" in length. On the 5" length there are two holes they are 3/16" Inner Diameter Weight: 5 oz Similar to the one in the pictures.

You are buying a bag of new Flush Solid Rivets. Approximately 1 pound. I believe over 1600 rivets.

You are buying a 2 pound bag of new Flush Solid Rivets. I believe 1500-1600 rivets. 1/8" diameter by 1-3/4" long.

Welcome!!! You are buying a Niagara Cutter 75349 Cobalt Steel Chamfer Mill, Extra Long Length, Angle, Long Reach, Inch, Weldon Shank, Uncoated (Bright) Finish, Roughing Cut, 30 Degree Helix, 6 Flutes, 6.5" Overall Length, 1.250" Cutting Diameter, 1.250" Shank Diameter

Aluminum Angle 1.25 x 1.25 x 48 in, 1/16 in thick, NEW!, USA! Description – These are fabricated from a 3003 Aluminum Alloy and measure 1.25 x 1.25 x 48 x slightly less than 1/16in thick. We ship from three locations including NC, OH, and sometimes from our truck.

Description – Bunch or random Flat and Angles mixed in. Nothing is wider than 1.5in. Don't ask us all the sizes because we won't know.

Aluminum Offset Angle 3/4” x 1-1/2” x 8 in, 1/16 in thick, .75 IN x 1.5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. They are very slightly less than a 1/16 of an inch thick.

Aluminum Angle 3/4 x 3/4 x 48 in, 1/8 in thick, NEW!, .75IN, USA! Description – These are fabricated from a 3003 Aluminum Alloy and measure 3/4 x 3/4 x 48 x 1/8 thick. We ship from three locations including NC, OH, and sometimes from our truck.