1.540 for sale, brand-new and used.

This listing is for a Brand New SET OF 5 pcs Snap On feet, 1 Low shank foot holder, 1 Adapter Foot that fits Bernina Old style sewing machines. You Will Receive : - 1 Foot Adapter Bernina Old Style - 1

1 NEW SUPERIOR PRODUCTS, INC. CGA-540 REGULATOR INLET NUT FOR OXYGEN. .908"-14NGO-RH-INT NUT, MHN-071P.

Origin: Made in the USA in an ISO 9001 and 14001 certified facility. Safety: Meets or exceeds all relevant industry standards - UL listed and CGA E-4. Passes all CGA E4 ignition tests.

Item: Regulator Type: Single Stage Cylinder CGA Connection Inlet: 540 CGA Connection Outlet: 9/16-18 RH B Gauge Size: 2.5 Gauges Delivery Pressure: 200 Overall Length: 7.3" Cylinder Gas: Oxygen Body Diameter: 2.75" Inlet Gauge: 3000 psi Delivery Pressure Range: 0 to 125 psi

This is a Smaller HARRIS MODEL # 1-100 OXYGEN regulator. This Regulator is a refurbished unit. It is a single stage regulator.

1 NEW CHROMED BRASS 540 CGA NIPPLE. 1/4" NPTM, 2.5 INCHES LONG, SOFT TIP, 3,000 PSI. CLEANED FOR OXYGEN SERVICE.

Product Details Tamper proof, self reseating internal HP safety valve* One-piece encapsulated seat design with an internal filter and a PTFE teflon seat Bronze adjusting screw for smooth adjusting

New old stock HAYNES® alloy 25 (L605) (UNS R30605) Ni 10.0, Cr 20.0, Mn 1.5, C 0.33, Si 0.40, Fe 3.00, S 0.030, Co Bal., P 0.040, W 15.00 High Perfo

You are bidding on 1 pc, replacement Thrust Bearing (920-08-020-5352) for the upper and lower guides on the Rockwell / Delta 14" Bandsaw. This Bearing has Steel Cage sides with side clearance. This is for the Bearing on the left only in the photo (The RH Bearing was the original).

Pair, (2), of High Quality bearings for the Delta Unisaw or Contractors saw. SOLD AS PART # 1086894 OR 920-04-020-5335 ARBOR BEARING Will not fit older Unisaws with Bullet motor and oval cutout on bases motor side.

50 Large Cut Off Wheels/ Discs 1-1/2" diameter, .040" Thickness, 1/16" arbor hole -- 50 per box Discs made of Resin bonded Aluminum Oxide for chrome precious and semi precious alloys and metals, stainless steels and non-ferrous metals as well as wood and plastics.

IEC Centra-M Centrifuge Up for auction is a used IEC Centrifuge Model Centra-M w/ 24 Slot Rotor and runs at 13.2k RPM . This item is in good condition with some minor cosmetic wear from normal use. There are a few scuff marks and scratches on the item but this does not effect the functionality of the item.