1.540 for sale, brand-new and used.

This is a solid Yuasa 5C Indexer with the CPNC-100 Controller. This is Japanese made, hard to find. Save thousands and get a better indexer.

Despatch PND2-29-21E Inert Atmosphere Oven/Chamber Comes with a copy of the manual and what you see in the pictures. If you don't see it, you probably wont get it. Specifications are from Despatch and may vary slightly due to upgrades, options or revisions this unit may or may not have.

Auto-Dip 3530 Dip Soldering Machine The Auto-Dip 3530 is ideal for electronic assemblers looking for an easy and affordable way to improve soldering speed and consistency. Dramatically more efficient and reliable than hand soldering or manual dipping, the 3530 features a pin-type, fixture-less board holder for PCBs up to 350 x 300 mm (13.8" x 11.8"). Multiple boards as small as 60 x 60 mm (2.4" x 2.4") can be soldered simultaneously by simply placing as many on the holder as space allows.

CENCORP SERIES 540 PCB PRINTED CIRCUIT BOARD PROFILER (092905509290) All items are sold as is without warranty unless specifically stated in the posting. This does not mean that the unit doesn’t work, only that we have not tested or checked it out. This may also mean that we are not knowledgeable in that specific item.

30KW 30-80KHz High Frequency Induction Heater Furnace LH-

This is our 4x4 CNC plasma and mill with rapids over 500 ipm. The reason we can say plasma as well as mill, is that we use 25mm rail and carriage bearings, not skate or groove bearings, which are held in place with spring on the stepper. We’ve used 15mm wide rack and pinion out of harden steel, and while others may use plastic or narrow gear racks, that can’t hold the stress needed to do the milling, our unit uses 15mm rack with 20 tooth pinion, so it has plenty of speed for plasma.

(1) LINCOLN ELECTRIC ARC Welding and Cutting Unit

Cemco Multiple Head Hydra-Air Boring MachineModel # 540 HABSerial # HAB-1124 Spindles2 drives 1 1/2 HP each with spindle2 driven spindlesVery good condition, lightly used, 15 years old

Industrial model, Ball Screws on all axis and over 100 inches per min travel. This is a 24"x 24" x 4.5" CNC. It's milled from 6061 aluminum, 20 mm rods, two precision forged double bearing blocks, and an oil flush connector on each axis.

MiB CNC Machine Router Powerful Spindle Motor 800W water-cool with VFD CNC3020

FULLSET CNC Router Machine CNC4030 800W Motor Milling Engraver + MPG + Tailstock

CNC4030 CNC 800W Water-cool Spindle Machine Router Milling Engraver 40x30cm Desk

CNC4030 CNC 300W 12000RPM Spindle Machine Router Milling Engraver 40x30cm Desk

Fullset CNC4030 CNC 300W 12000RPM Spindle Machine Router Milling Engraver