1.540 for sale, brand-new and used.

30KW 30-80KHz High Frequency Induction Heater Furnace LH-

This is our 4x4 CNC plasma and mill with rapids over 500 ipm. The reason we can say plasma as well as mill, is that we use 25mm rail and carriage bearings, not skate or groove bearings, which are held in place with spring on the stepper. We’ve used 15mm wide rack and pinion out of harden steel, and while others may use plastic or narrow gear racks, that can’t hold the stress needed to do the milling, our unit uses 15mm rack with 20 tooth pinion, so it has plenty of speed for plasma.

HERE WE HAVE A LOT OF WESTERN ENTERPRISES WELDING ACCESSORIES . 1PC 15-3 NIPPLE----------1 PCS #66-CGA-540 NIPPLE-------1 PCS # 122 NUT & NIPPLE----------1 PCS # 123--NUT & NIPPLE------2 PCS # 62 NUT-----1 PCS FA-3 FLASH BACK ARRESTOR. ALL OF THESE PARTS ARE NEW AND UNUSED.

New old stock HAYNES® alloy 25 (L605) (UNS R30605) Ni 10.0, Cr 20.0, Mn 1.5, C 0.33, Si 0.40, Fe 3.00, S 0.030, Co Bal., P 0.040, W 15.00 High Perfo

CUT-70 Air Plasma Cutter With P80 Torch & Pilot ARC Starting Package include:CUT-70 AIR PLASMA CUTTER

(1) LINCOLN ELECTRIC ARC Welding and Cutting Unit

Cemco Multiple Head Hydra-Air Boring MachineModel # 540 HABSerial # HAB-1124 Spindles2 drives 1 1/2 HP each with spindle2 driven spindlesVery good condition, lightly used, 15 years old

You are bidding on 1 pc, replacement Thrust Bearing (920-08-020-5352) for the upper and lower guides on the Rockwell / Delta 14" Bandsaw. This Bearing has Steel Cage sides with side clearance. This is for the Bearing on the left only in the photo (The RH Bearing was the original).

NEW!!!! Steel City Tool Works 65120 Deluxe Air Filter - 3 Speed Motor: 1/5 HP TEFC 115V 60HZ MAX CFM: 540,730,1250 30.5 X 25.8 X 13.5 STANDARD FILTRATION: 5 MICRON EECTRIC OUTER FILTER DECIBEL READING 68DB

Pair, (2), of High Quality bearings for the Delta Unisaw or Contractors saw. SOLD AS PART # 1086894 OR 920-04-020-5335 ARBOR BEARING Will not fit older Unisaws with Bullet motor and oval cutout on bases motor side.

Industrial model, Ball Screws on all axis and over 100 inches per min travel. This is a 24"x 24" x 4.5" CNC. It's milled from 6061 aluminum, 20 mm rods, two precision forged double bearing blocks, and an oil flush connector on each axis.

Commercial model, Ball Screws and 25mm Rail & Carriages on all axis. Special Pricing reg $4995.00 This is a 24"x 49" x 4" CNC. It's milled from single sheet of 6061 aluminum, not forged pot metal and ground to fit then covered with tin.

Commercial model, Ball Screws and 25mm Rail & Carriages on all axis. Special Pricing reg $4595.00 This is a 24"x 24" x 4" CNC. It's milled from single sheet of 6061 aluminum, not forged pot metal and ground to fit then covered with tin.

3 Axis CNC Router 3020 with JY5300 Controller Box

MiB CNC Machine Router Powerful Spindle Motor 800W water-cool with VFD CNC3020

FULLSET CNC Router Machine CNC4030 800W Motor Milling Engraver + MPG + Tailstock