1/16 thick for sale, brand-new and used.

===Model 410. Largest Capacity Benchtop Model on the Market===

Electronic Component

Updated 10 ~ 32V to 35~60V 80W Boost Power Module Updated: Input and output are used ruby ZLH series 35V 1000UF and YAX 63V 330UF high frequency low impedance series capacitor. With a wing of the heat sink, cooling effect has improved significantly. Low output ripple, at 48V output, the output ripple less than 0.5%.

10 ~ 32V to 12~35V 100W Boost Power Module Input and output are used ruby ZLH series of high-frequency low-impedance capacitor 35V 1000UF. With airfoil cooling, significantly improved heat dissipation. Low-voltage design, the input start voltage must > 10V.

Electronic Component

Lot of 2 power supply bases, NOS, NIP, for small "brick" type power supplies modules. These power supplies are made by many different manufacturers. Examine the dimension diagram carefully -- the brick power supplies I have DO NOT FIT; even the one made by Semiconductor Circuits!

Electronic Component

sgbyincons

fulllove365

LD12C Series - Constant Current LED Driver Board with PWM Control is a highly effective continuous step - down converter optimized for managing one or High Power LED string from a source with a higher voltage than the sum of the voltages of all LED strings attached . Control algorithm allows highly efficient and accurate control of power LEDs . The device operates from an input voltage between 8V and 32V and provides an externally adjustable output current of up to 1A .

This is a small 12 VDC fan (0.23 Amp). It is about 2-3/16" square and 1" thick.

This is a used high power MUFFIN Electric fan. Previously used to cool a stereo amplifier it has actually seen little use. Just dusty from lack of use.

BERGQUIST GAP PAD Description: .200 GAP PAD ULTRA SOFT AC 8" x 16" Material: GAP PAD VO ULTRA SOFT AC 0.200in/5.080m 17 Sheets Available in Total (3) Bundles of 5 Sheets (1) Bundle of 2 Sheets Price listed is per sheet

5 pcs Aluminum Heat Sink for LED, Power Transistor or CPU You're are bidding on 5 new pcs of Aluminum Heat Sink. The Heat sink measures 1 3/8 inches by 1 3/8 inches. The fins are 3/4 inch and the base is 3/16 thick.