1/16 to degrees for sale, brand-new and used.

The New PLS 4 laser level from P The New PLS 4 laser level from Pacific Laser Systems is a plumb, level, and square laser line tool with a combination of up and down points. The PLS 4 is fully self-leveling and has a range of +/-100 feet. Perfect for any alignment or leveling task.

Bosch GCL 25 Self Leveling 5-Point Alignment Laser w/ Cross-Line Five Points Plus a Cross-Line - For a two-in-one laser Highly Visible Laser Points and Lines - For horizontal leveling, vertical alignment, squaring, layout and plumb point transfer Manual mode - Locks lines for use at any angle Smart Pendulum System - Self levels and indicates out-of-level condition, locks when switched off Four Selectable Modes- Easily toggle through 5-point, horizontal line, vertical line or cross-line modes

Trimble Spectra Precision HV401 Laser Level With HR550 Receiver YOU ARE BIDDING ON A Trimble Spectra HV401 IN EXCELLENT CONDITION ""it comes as shown in the pictures""".

Spectra Precision LP50 Laser Level, 5 Beam Point Generator with Telescoping Laser Pole 7220-01 LP50 Laser Pointers

Spectra Precision LP30 Laser Level, 3 Beam Point Generator with Telescoping Laser Pole 7220-01 LP30 Laser Pointer

Spectra Precision LP50 Laser Level, 5 Beam Point Generator w/ Carrying Case LP50 Laser Pointers

Spectra Precision LP30 Laser Level, 3 Beam Point Generator w/ Carrying Case LP30 Laser Pointer

White Mount Board - For Proseal and hot laminators 41"x61" (10 sheets) For Mounting in one pass. No overlaminate sheet. To use, place your print on the the waxy side of the board and cover with enclosed coversheet.

Pouch Board - Black Matte 41"x61" (10 sheets) For Mounting and Laminating in one pass. To use, place your print between the board and film and insert into a heated roll laminator. Your print will exit the laminator adhered to the board and protected by an optically clear film.

Pouch Board - Black Gloss 41"x61" (10 sheets) For Mounting and Laminating in one pass. To use, place your print between the board and film and insert into a heated roll laminator. Your print will exit the laminator adhered to the board and protected by an optically clear film.

Pouch Board - White Matte 41"x61" (10 sheets) For Mounting and Laminating in one pass. To use, place your print between the board and film and insert into a heated roll laminator. Your print will exit the laminator adhered to the board and protected by an optically clear film.

Pouch Board - White Matte 36"x48" (10 sheets) For Mounting and Laminating in one pass. To use, place your print between the board and film and insert into a heated roll laminator. Your print will exit the laminator adhered to the board and protected by an optically clear film.

This is a used item that starts up. Have not printed with it. Item looks to be complete with no manual.