1/2 tek screws for sale, brand-new and used.

40 pcs hex washer head tek 5 screws. These are zinc plated self-drilling sheet metal screws with an extra long drill point tip and are threaded from the top of the tip to the bottom of the hex head. Hex teks 5 have a longer drill tip than regular hex teks.

WELCOME TO RIVERCITY INDUSTRIAL SUPPLY! PHONE: 763 789 BOLT (2658) FAX: 763 789 NUTS (6887) YOU WILL GET THE FOLLOWING: 500 Pieces Of Phillips Pan Head Self - Drilling TEK Screws. These zinc plated fasteners are #8 thread size and are 2" in length.

250-SFS Intec Woodgrip XG "Control Seal" 1 1/2" (HWH) Hex Washer Head Self Tapping Blue Screws.... PRODUCT: #12-8 x 1-1/2 in. actual size is shown in photo.

var itemNumber = window.ebayItemID ?

WELCOME TO WARREN FASTENINGS SOUTH PHONE: 843-554-1322 FAX: 843-554-1562 200pc indented hex washer head self-drilling screws. These zinc plated fasteners are 14 thread size and are 2-1/2" in length with a 3/8" hex.

#8 x 1 1/2" Indented Hex washer head Self Drilling Screw Zinc Plated- 1000 pcs #8 Metal to metal fastening, used in light gauge framing. Used by metal framing & HVAC contractors/fabricators. Hex Head Diameter- 1/4" Length measured under the head 1 1/2" Drill point- #2 Material thickness- .035- .100 Unit price- .04/pc

2032C4D.1.52 New Self Drilling Screws, Size #14 x 1.5", Zinc Plated, Part Number Unknown. Each bid quantity is for a Lot of Seventy-Five (75) Screws. You may bid / buy any number of lots, up to the total quantity available above.

2036D5F.1.48 New Self Drilling Hex Washer Head Screws, Size #12 x 1.5", Zinc Plated, Part Number Unknown. Each bid quantity is for a Lot of One Hundred Fifty (150) Screws. You may bid / buy any number of lots, up to the total quantity available above.

Teks Self-Tapping Screws 1/4-20 X 3 33/4 " PFH #3 CLIMASEAL COATED ( FOR TRATED LUMBER OR OAK) TEK 4 MAX WOOD THHICKNESS WOULD BE ABOUT 2 1/2 -2 3/4 PLY-METAL WITH WINGS NO PRE-DRILLING NEEDED NEED TO USE A LOW RPM TEK GUN OR IMPACTS WORK ALSO IF YOU ARE BURING UP THE TIPS YOU ARE DRILLING TO FAST TEK GUNS RUN ABOUT 2000-2500 RPM - 100 for $49.99 - For attaching wood to metal NO PRE DRILLING.....DRILL THROUGH THE WOOD...THE WINGS BREAK OFF AND NOW IT WILL DRILL INTO YOUR METAL FRAME.

RETROFIT to LED TUBES KIT FOR 8 FT T12 LIGHT STRIP NO BALLAST NO BULBS 1 of: LED Retrofit Kit Retrofit Kit for 8’ strip four (or 3) (or 2) lamp T8 LED'S (as a finished result) Includes: 1 Metal Plate 8 Non-Shunted Lamp Holders 2 clips 8 TEK screws Does not include

Build your own chain link gate kit includes: (4) 1 3/8" Aluminium hex gate L's or 90's. (2) T- clamps with bolts and nuts, and (16) Tek self drilling screws.This is for use with 1 3/8" pipe to build gate frame. We can sell you the chain link fabric, tension bars, hinges, latches, ect as well.

Quantity one (not five!), Tektronix (Tek) ROM Pack for 1240/1241 Logic Analyzers in VERY GOOD condition. Cosmetically one has "V2.0" written in ink on the front and the other has the partial remains of a label on the front. Both packs are missing one of the four screws that hold the pack shell halves together - it's a commonly available machine screw - three screws are more than adequate to keep the case halves tightly closed.

About (250) (Less a few used) ITW Buildex # 1092057, 1132086, Philips head Tek Screws # 12-24 x 2 1/4", PFH TEKS. Box was bought and a few used for a specific application but overall did not work for that application. They have sat around a while so it is time to go.