1/3 bar for sale, brand-new and used.

We are offering 64 used bar grating stair treads, 11" x 36" with checkerplate nosing. The non-serrated bars are 1" x 3/16" (19W4), painted black, with end plates punched for bolted attachment. Each tread is $20.00 plus tax, FOB Chicago.

Product Description

This device is preloaded with adapted GeigerKit_Default sketch (v.11.0.1)

You are bidding for the new, fully assembled, microprocessor-based ionizing radiation counter with Black-on-Green LCD, threshold LED, button-and-Buzzer snap-on shield. This listing is without the Geiger–Muller tube, TTLSerial<>USB adapter and battery. So in order to use it you need to have a Geiger–Muller tube which works at voltages up to 525V.

Up for sale Heavy duty boring bar 13" 1/2 total length and 1" 1/4 dia shank for KDK tool holder. made for threading groove or deep material boring operations a 3/8 round tool and a set screw on end to lock down the tool. boring bar was made for a job that had a deep bore and a thin wall.

Click Here. Double your traffic. Get Vendio Gallery - Now FREE!

Ebay Base This  sale is for a boring bar in 5/8" shank. The business end of the bar  is 1/2"

1pcs each Solid carbide boring bar inserted into 3/8" diameter tool steel shank min bore / max bore depth.060 3/8".070 7/16".080 1/2".085 1/2"

1pcs each Solid carbide boring bar inserted into tool steel shank 3/8" diameter Min bore / Max bore depth.135 3/4.150 3/4.150 long 1 1/2.180 1

Ebay Base This  sale is for a Stainless Steel bori

Ebay Base This  auction is for

One New MICRO 100 9/16" X 2-1/4" Right Hand Brazed Carbide Tip Boring Bar. MICRO 100 Super Carbide Tools Part No.: PB-26 Size Min Bore: 9/16" (.562") Length of Cut (Max Bore Depth): 2-1/4" Overall Length: 3-3/4" Shank Dia

One New MICRO 100 11/16" X 1-7/8" Right Hand Brazed Carbide Tip Boring Bar. MICRO 100 Super Carbide Tools Part No.: PB-28 Size Min Bore: 11/16" (.687") Length of Cut (Max Bore Depth): 1-7/8" Overall Length: 3-3/8" Shank D

HSS TOOL BIT SELECTION This Is A "Brand new" Set Of 8 Pcs. HSS Blanks For Professionals And Hobbyists Making Their Own Tools Currently Selling At A Bargain Bi

Williams No. 00B Boring tool holder for smaller lathes. Missing one clap screw, otherwise excelent condition.

INCREASE YOUR PROFITS BY ADDING AN MG INDUSTRIES BAR PULLER TO YOUR CNC LATHE Pulling finger are replaceable. This sale is for 2 new pulling fingers and 4 new screws to hold them to your MG INDUSTRIES brand bar puller. Plus...

Offered is an extra, left-over piece of very think White Delrin (acetel) raw material. The actual measurements is about: 2 1/2 x 3 5/16 x 12 inches long. This is a little larger than 3” wide bar stock because it was cut from a slab that was much wider.

2 1/2 SINE BAR INSPECTION KIT+ 1 - 2 - 3 BLOCKS WITH 23 HOLES For angles set up by using Sine Bar with 1-2-3 Blocks or Gage Block. Parallelism: 0.0004". Working face accuracy 0.00003"/ per inch.

Features: Organize your shop or garage with this magnetic bar. Easy to install, clean up all the tools from the ground in minutes. This bar features with a 24-inches long strong magnet, holds a total of tools for up to 50 lbs.

Features: Organize your shop or garage with this magnetic bar. Easy to install, clean up all the tools from the ground in minutes. This bar features with a 24-inches long strong magnet, holds a total of tools for up to 50 lbs.