1/4 allen wrench for sale, brand-new and used.

The MX Series is a state-of-the-art mixing valve that manages the hot and cold supply based on control settings. Accurate control of temperature provides energy savings, increased comfort and safety. The Teflon wear surfaces prevent calcium buildup.

You are viewing a Borite mini boring bar set. The set is number 2C235. The original set contained 6 bars.

6" Long Extension Shaft x 1/4" hole (6mm) for drills scuff hones deburr tools 1/4" (6mm) Opening to accept drill bits or our for scuff hones (cylinder or ball shaped) or for drill bits, deburr tools, etc. Tool is 6" long with 2 securing hex nuts to hold drill bits or tools with shaft in place. Comes with Allen wrench.

CORUZZI PERFORMANCE DESIGN All of our tools are made in the USA. This is a 5/8" diameter by 8" long lathe right hand boring bar. It has flats milled on top and bottom.

This is a ROPER WHITNEY XX hand punch, made in Rockford Il. U.S.A. The punch is rated for 1.2 TONS of punching power.

Received in an estate salethis set looks unused with the exception of the two dings shown in picture106 pieceSize 6 or 1/4 inchPictures are of actual item106 punches, 6 piece holder, Allen wrench and tool alignment pinSharp face stylePayPal onlyNo returns

CORUZZI PERFORMANCE DESIGN All of our tools are made in the USA. This right hand lathe turning tool is precision machined from durable 4140 alloy steel. 3.0 inches long with a 1/4" square shank.

CORUZZI PERFORMANCE DESIGN All of our tools are made in the USA. This straight(neutral) lathe turning tool is precision machined from durable 4140 alloy steel. A great tool design for facing, turning, chamfering sharp edges, even threading.

Check out my other items! Company: EDM Basics (located in Rochester New York) Wire EDM Clamp Set (the photos are of a M8 set and a M6 set) (6) Large clamps

Piranha Rp-50 Serial Number 9715 Machine is in great shape. Works perfect, tight machine, knives are in great shape, coper too. Can use a little paint but that's it.

Total System “D-D Work Rest” for Wilton & Jet Square Wheel Knife Maker Belt Grinders Work Rest Total System Includes: -Large Work Rest for Contact Wheel / Flat Platen with a 2-3/4” x 1/2” cutout to wrap around the belt

Contact Wheel & Flat Platen “D-D Work Rest” for Grizzly G1015 Knife Maker Belt Grinders Work Rest Includes: -Work Table 1/4" plate steel with 2-3/8” x 1/2” cutout to wrap around the belt

FLY-CUTTER HEAD WITH TOOL FOR UNIMAT SL 1000 AND DB 200 FLY-CUTTER WILL SCREW DIRECTLY ONTO THE HEADSTOCK SPINDLE OF THE UNIMAT LATHE AND MILLING ATTACHMENT THREADED 12 X 1 1/4" TOOL INCLUDED 1 allen wrench 2 mm ITEM DESCRIPTION &n

Fly Cutter 5/16”Bit, x 2-3/4”Long W/ 5/8”Shank Nice Stubby Fly Cutter 5/8” Shank x 1-1/4”Long. Item comes with Allen Wrench. Combine Wins & Save Shipping $$$$$.

1" fly cutter for milling larger surfaces. This cutter is individually hand crafted in the USA to precision tolerances to accept a 1/4" HSS tool, but if needed can use brazed carbide tool if you wish(note these are not always the stated tool size for brazed carbide tools, so if needed I can craft one to meet your specific needs). I will provide the fly cutter, set screws and allen wrench to fit them.

3/4" fly cutter for milling larger surfaces. This cutter is individually hand crafted in the USA to precision tolerances to accept a 1/4" HSS tool, but if needed can use brazed carbide tool if you wish(note these are not always the stated tool size for brazed carbide tools, so if needed I can craft one to meet your specific needs). I will provide the fly cutter, set screws and allen wrench to fit them.

Kit fits 4-, 6-, and 8-inch calipers Points screw into the bottom or any side of the holder Comes with a pair of holders, 2 inches long and 3/8 inches square Four pairs of 3/4-inch long points -- 60-degree pointed, 1.8 inches in diameter; ball end, 1.8 inches in diameter; flat, 1.8 inches in diameter; and flat, .76-inch diameter Allen wrench included To combine shipping, please purchase all items needed without paying and email us when you are

You are bidding on a Indi-Square Squareness gage, Model 8 - Recently Calibrated. INDI-SQUARE instruments are used by manufacturers and machine tool builders industry wide in inspection departments and tool rooms. Because they are portable, they are easily used on the shop floor for checking in process work at production setups or on large parts themselves.