1/4 chamfer mill for sale, brand-new and used.

INGERSOLL 60-DEGREE INDEXABLE CHAMFER END MILL PART NO. 15M1Z1081R02 1-1/4" WELDON SHANK Very good used condition, as pictured. Payment due within 48 hours of purchase.

SANDVIK 30-DEGREE INDEXABLE CHAMFERING END MILL PART NO. RA215.64-36M32-6012 1-1/4" WELDON SHANK Appears in new / unused condition. Actual item pictured.

This is a Bosch Spiracut with a custom head attachment used in our shop for deburring and chamfering mostly large aluminum plates and small aluminum pieces. It will also do steel, wood and plastics, and chamfer up to 7/32" as the cutter is 1/4". The cutter is a 1/4" solid carbide 4 flute stub end mill.

Untitled Document Bits included in set: Tooling Kit for Swift 4x4 and 4x8 2 - 1/4" Spiral Compression 1 - "V" Groove 90° Angle 1 - 3/8" Spiral Compression 1 - 1/8" Spiral Plunge Down Cut 1 - 1/4" 3D Carving ZrN Coated 1 - 1/8" Collet for ER-20 Nut 1 - 1/4" Collet for ER-20 Nut 1 - 3/8" Collet for ER

RE-5203 0-120RPM 1-3L CONDENSER EVAPORATOR ROTARY VERTICAL

Widia-Hanita M42 End Mill, 6 Flt, 1-1/2" Mill Dia., 1-1/4" Shank Dia., 2" LOC, 4-1/2" OAL, .06 Radius, TiAlN Coated, Surplus. Purchased this end mills for a project. Once the project ended, we had a surplus of these tools.

Minicut Roughing Super Cobalt End Mill, 3 Flt, 1-1/4" x 1-1/4" x 2" x 4-1/2", 43.5 Deg Helix, Weldon Flat, Surplus. Purchased this end mills for a project. Once the project ended, we had a surplus of these tools.

Carbide End Mill Rougher Finisher, 4 Flutes, 1/2" Dia., 2" LOC, 4" OAL, TiAlN, Surplus. Tools are NEW. Bought for a project but were never used.

Seco R220.53-02.00-12-4A Indexable Chamfer and Angle Face Mill...Cutting diameter 1.97"...Max cut depth 0.236"...Lead angle 45...3/4" arbor hole diameter...1.57" overall height...4 flute...2.44" max body diameter...New and unused!

You are bidding on ( 1 ) new Iscar 5622179, 1/2", Multi-Master, MM EFS Style Milling Tip Inserts - 2 each P/N 5622179 Series - Feedmill / Multimaster Milling Tip Style - MM EFS Milling Tip Type - End Mill Cutting Dia. - 1/2" / 0.5000" Chamfer - 45° x 0.015" No. of Flutes - 4 Thread Size - T08 Material - Carbide Finish / Coating - TiALN Made in Israel FREE SHIPPING in the USA only.

Low starting bid and no reserve! Free Shipping! Powdered Metal (PM) is tougher and more cost effective than solid carbide.

2 X 1.0 NIAGARA 3 FLUTE2 X 45 DEG CHAMFER MILL1 X TAPERMILL1 X L.H 1/2 NIAGARA1 X 1.500 SHEFFIELD1 X 3/4 Y.G PLEASE VIEW ALL PHOTOS AS THEY REFLECT THE CONDITION OF THE ITEM. IF THERE IS ANY QUESTIONS PLEASE FEEL FREE TO ASK.

I have 2 clear acrylic sheets both measure 1/4" x 24" x 24" . I CAN CUT FOR FREE I can also do these for FREE, : Mill edges, polish edges, flame polish edges, edge finish edges, bullnose edges, roundover edges, bevel edges, break edges, chamfer edges. Also, I can do cut outs of material, I can cut circles.

Brand new Hanita Varimill 5/8 dia. x 1-1/4 loc x 3-1/2 oal .020" chamfer corner

Hello today I have five (5) 1/4" thick acrylic sheets. Sheets measures 20" x 21"  All sheets have protective paper masking I can cut material for FREE  I can also do these things for FREE  Mill edges, polish edges, flame polish edges, edge finish edges, bullnose edges, roundover edges, bevel edges, break edges, chamfer edges. Also, I can do cut outs of material, I can cut circles.

I have 2 clear acrylic sheets both measure 1/4" x 24" x 24" .  sheets have paper masking to protect from scratches I CAN CUT FOR FREE  I can also do these for FREE, : Mill edges, polish edges, flame polish edges, edge finish edges, bullnose edges, roundover edges, bevel edges, break edges, chamfer edges. Also, I can do cut outs of material, I can cut circles. and I can do radius corners.   PLEASE MESSAGE ME BEFORE BUYING IF youre going to want me to cut and do any other thinds to the sheet.