Item# 4283 - Myford 5" x 12" Cylindrical Grinder, Model CB Equipped With: Grease fitting lube system 6 Jaw Chuck Tail stock Work Lamp Bijur one shot oiler Coolant tank Adjustable work light
NEW in original packaging, was purchased from Sears MODEL 9-19905 exclusive Bias Motor Design positioning of exhaust ports in cylinder varies the power stroke to provide a maximum 600 ft-lbs in reverse and a selectable 50-400 ft-lbs (with a ma. of 450 ft-lbs) in forward Conveniently located grease fitting for easy lubricating of impact mechanism High-Output Twin Hammer design for smooth, efficient power transmission 1/2 - in Air Inlet with Minimum 3/8-in.
M 28405 Grinder, T27 4-1/2 in 5/8-11 External 1 hp, 1 per case T-27, 4-1/2 in Grinder with guard to be used with 4-1/2 in Bonded, Coated, and Surface Conditioning Products. Removable side handle furnished with tool. Guard can be positioned for greater surface visibility.
These are used Albion R3 Slotted wheel medium duty casters used on some UPS equipment that has been recycled.Metal plate size is 4" x 4 1/2"; Total height is 4"; Wheel diameter is 3 1/4"; Wheel width is 2".Roller bearing and roller wheel have a grease fitting to keep the bearings lubricated.. Have multiples of this caster available.
THREE 2" X 6" Casters One with swivel lock and two with rigid mount , rubber wheels in very nice used condition I believe this style of casters are used on portable furniture movers and heavy duty roll around carts $15.00 S/H in the continental USA Please note the item title says (4) casters but this auction is only for three, for some reason ebay has blocked me from revising the title description. Please email me with ?????'s,concerns, or if you need to see more pic's.
Four industrial Bassick casters. The Bassick Caster Company manufactured casters in Bridgeport, CT and is no longer in existence. The poly wheels measure 3-3/4" in diameter and each caster weighs well over 6 pounds.
Never been used with all the pieces inside! Selling AS IS! RETURN POLICY –NO RETURNS FOR ANY REASON OTHER THAN DEAD ON ARRIVAL YOU WILL BE REQUIRED TO SEND THE ITEM BACK PROPERLY PACKAGED, INSURED, AND WITH DELIVERY CONFIRMATION.
Genuine U.S. Military Issue Surplus Lot of 8 - Lubrication Grease Fittings - P/N: MS15001-1 for Military Vehicle (NOS) (NOS) = New Old Stock P/N: MS15001-1 We are not sure who manufactured this part, we came up with the following.... AAI Corporation P/N: CB90-41217-13 AER-BEA Co.
These are used PPI heavy duty casters just removed from large UPS equipment that was taken out of service and recycled for other uses.Plate size is 4" x 4 1/2"; Total height is 5 1.4"; Wheel diameter is 4"; Wheel width is 2". Roller bearing plate has a grease fitting so you can lubricate them for longer bearing life. Roller wheel has a heavy duty bolt for assembly.
These are used light duty casters used on some UPS equipment that has been recycled.Metal plate size is 4" x 5 1/8"; Total height is 5"; Wheel diameter is 4"; Wheel width is 1 5/8".Roller bearing has NO grease fitting and roller wheel has a pinned bolt through it. Have multiples of this caster available.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
