1/4 inch npt for sale, brand-new and used.

Brass 3/8" Inch ID Hose Barb 1/4" Inch NPT Straight Swivel Connector Fitting Coupler Air 300 P.S.I. Rating Please feel free to inquire.

Solid Brass Air Compressor Pressure Relief Valve 140 PSI 1/4 Inch Male NPT ASME Certified with Pull Ring. Please feel free to inquire.

Solid Brass Hex Head Plug Adapter Fitting 1/4" Inch Male NPT Air Fuel Oil Water. Please feel free to email any questions.

Solid Brass Manifold X Street Pipe Cross Four Way 1/4" Inch Female NPT Air Fuel Water .Please feel free to email any questions.

Solid Brass Street Pipe Tee 1/4 Inch Male with Two 1/4 Female NPT Air Fuel Water. Please feel free to email any questions.

Solid Brass Hex Adapter Fitting Reducer 1/8 Inch Male 1/4 Inch Male NPT Air Fuel Water. Please feel free to email any questions.

Solid Brass Hex Adapter Pipe Coupling Fitting 1/4 Inch Female NPT Air Fuel Water. Please feel free to email any questions.

Solid Brass Barb Fitting 1/8 Inch Hose ID 1/4 Inch Male NPT Coupling Air Fuel Water. Please feel free to email any questions.

Solid Brass Air Compressor Pressure Relief Valve 200 PSI 1/4 Inch Male NPT ASME Certified with Pull Ring. Please feel free to inquire.

FACTORY SEALED GPI ELECTRONIC DIGITAL 01A SERIES METER 01A31GM DIG FUEL METER AL 1" FNPT POP MFG : JUN0713 ACCURATE, CONVENIENT, RELIABLE AND ECONOMICAL *FACTORY CALIBRATED FOR GASOLINE, DIESEL FUEL OR KEROSENE READY INSTALL AND USE *FLOWRATE OF 3 TO 30 GPM OR 10 TO 100 LPM FOR PUMP OR GRAVITY FLOW SYSTEM *LCD DISPLAY WITH FLOATING DECIMAL POINT FOR EASY VIEWING AT THE NOZZLE *MANUAL AND AUTOMATIC ON, AUTOMATIC OFF *1-INCH INLET AND OUTLET. 3/4" FITTINGS INCLUDED WITH MOST NPT THREAD MODELS

This is a listing for Sierra Instruments SteelMass 640S Flow Meter (640S-NAA-L06-M1-E2-P3-V1-DD-0-CC) This includes the following: Sierra Instruments SteelMass 640S Flow Meter (640S-NAA-L06-M1-E2-P3-V1-DD-0-CC) NAA =

This is a King Instrument 1-3.5 GPM Liquid Flow Gauge @ SP.GR.1.0 Length 6 1/2" inch. Fittings are 3/4 inch NPT.

US FilterMaxx 3000G Centrifuge US Filtermaxx builds the Highest Capacity- Most Powerful Centrifuges 1.5 Horsepower Baldor Motor 1800RPM 5000 RPM Bowl Speed Generates 3000Gs See us at: http://bestcentrifuge.com/videos

Gas purifier Low pressure/High capacity Model 460 Matheson This is a gas purifier assembly made by Matheson, model 460. In good used condition Includes inline filter, used filter cartridge (probably 463) and moisture indicator Uses 461, 462 or 463 cartridges Spring pressure seats cartridge firmly 400 psi max 350 degrees F max 1/4 inch NPT ports Specifications: MFG: Matheson Model: 460 Serial: Volts: &n

A 1/2" ITT-Grinnell, CF8M cast, Stainless Steel bodied, Diaphragm Valve welded to a piping extension, with a 1-1/2" Tri-Clamp fitting attached close to the valve and with a Spraying Systems spray nozzle with a 1/8" NPT female thread attached at the far end, as pictured. The length from the Tri-Clamp fitting to the end of the Spary Nozzle is about 6-3/4". This ITT - Grinnell Diaphragm Valve and Spray Nozzle Assembly are custom welded, coming as pictured, and are in very good condition.

NEW NORGREN GAS REGULATOR 1/4" NPT R83-200-RNNA You are bidding on a New Norgren Gas Regulator with 1/4" NPT ports, Model #R83200RNNA. Features Maximum Inlet Pressure Rating 3000.0 pounds per square inch Outlet Pressure Range 10 to 175 psig (0.7 to 12 bar) Relieving models allow reduction of outlet pressure even when the system is dead-ended Two high pressure inlet ports and two regulated pressure outlet ports Diametrically opposite inlet ports provide easy manifolding of several regulators

ebay template

PRM 2.5 Inch Vacuum Gauge Chrome-Plated case Brass 1/4" NPT Bottom (0-160" WC) 2.5" Dial face1/4" Bottom ConnectChrome plated caseBrass Internals and FittingDry Gauge0-160" WC PRM

PRM 2.5 Inch Pressure Gauge Chrome Plated case Brass 1/4" NPT Back (0-100" WC/PSI) NEW 2.5" Dial face1/4" Bottom ConnectChrome plated caseBrass Internals and FittingDry Gauge0-100" WC/PSI